跳转到主内容

简介

Removing the core is easy, but you will be removing 4 screws, so make sure you have a place to put them for safe-keeping.

配件

没有特定配件。

  1. Slide the battery cover up and off the phone. Slide the battery cover up and off the phone.
    • Slide the battery cover up and off the phone.

  2. Pop the battery out of its slot by lifting it up. Pop the battery out of its slot by lifting it up.
    • Pop the battery out of its slot by lifting it up.

  3. Insert the plastic opening tool in between the front case and the back case. Apply downward pressure to make the case lift upwards, thus popping the front case off. Use caution when removing the front case. It may seem stuck but just ease it out.
    • Insert the plastic opening tool in between the front case and the back case.

    • Apply downward pressure to make the case lift upwards, thus popping the front case off.

    • Use caution when removing the front case. It may seem stuck but just ease it out.

  4. Remove the 4 screws in the corners of the front of the phone using a T6 screwdriver. Note that the top 2 screws are silver and the bottom 2 screws are black.
    • Remove the 4 screws in the corners of the front of the phone using a T6 screwdriver.

    • Note that the top 2 screws are silver and the bottom 2 screws are black.

  5. There is a black tab in the top left corner holding the core in place. Remove the core by pulling straight up to prevent breaking the tab. Remove the core by pulling straight up to prevent breaking the tab.
    • There is a black tab in the top left corner holding the core in place.

    • Remove the core by pulling straight up to prevent breaking the tab.

结论

To reassemble your device, follow these instructions in reverse order.

Emily Prescott

于2011年01月10日注册

476 信誉积分

创作了4篇指南

团队

Cal Poly, Team 14-10, Forte Winter 2011 Cal Poly, Team 14-10, Forte Winter 2011 的会员

CPSU-FORTE-W11S14G10

5 名成员

创作了16篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 502