简介

This guide will explain how to take off the camera's exterior case.

配件

无需配件。

Begin by placing the camera upside down and removing the three small center screws.
  • Begin by placing the camera upside down and removing the three small center screws.

  • All screws are the same size and length and can be used interchangably.

添加评论

Mac RAM 套件
加速你的Mac。充分利用它的内存。
Mac RAM 套件
从Mac中清理出更多内存。
Turn the camera on its side (Counterclockwise). Remove the two small screws on either side of the silver panel. Turn the camera 180 degrees onto its other side and remove the two small screws on either side of the silver panel.
  • Turn the camera on its side (Counterclockwise). Remove the two small screws on either side of the silver panel.

  • Turn the camera 180 degrees onto its other side and remove the two small screws on either side of the silver panel.

添加评论

Locate the camera's tripod mount located on the bottom of the camera. Carefully remove the camera's tripod mount and place it aside. Be careful not to lose this piece.
  • Locate the camera's tripod mount located on the bottom of the camera.

  • Carefully remove the camera's tripod mount and place it aside.

  • Be careful not to lose this piece.

  • Rotate the silver panel labeled 4x clockwise.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

Alex

于2012年03月09日注册

172 信誉积分

创作了3篇指南

团队

Clemson, Team 2-3, Benson Spring 2012 Clemson, Team 2-3, Benson Spring 2012 的会员

CLEM-BENSON-S12S2G3

3 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 2

总计 1,275