简介

Removing the front cover is a necessary first step in disassembling the camera in order to repair or replace any internal parts.

配件

无需配件。

Locate the battery door at the bottom of the camera. Press down on the door and  slide it back.  The door will pop open.
  • Locate the battery door at the bottom of the camera.

  • Press down on the door and slide it back. The door will pop open.

添加评论

Remove the battery from the door that you opened in the previous step.
  • Remove the battery from the door that you opened in the previous step.

添加评论

There are two screws on the left and right sides of the camera, and two screws on the bottom. Use a PH00 screwdriver and remove the six 2.9mm screws. Use a PH00 screwdriver and remove the six 2.9mm screws.
  • There are two screws on the left and right sides of the camera, and two screws on the bottom.

  • Use a PH00 screwdriver and remove the six 2.9mm screws.

添加评论

Use hands to gently pry the front casing away from the camera. Use hands to gently pry the front casing away from the camera.
  • Use hands to gently pry the front casing away from the camera.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

iDeleted

于2010年07月07日注册

2,101 信誉积分

创作了41篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 2

总计 2,244