配件

无需配件。

  1. Remove the battery (which also functions as the back cover) from the device. This step is not explicitly shown, but a picture without the battery cover shows the device post-battery removal. Remove the battery (which also functions as the back cover) from the device. This step is not explicitly shown, but a picture without the battery cover shows the device post-battery removal.
    • Remove the battery (which also functions as the back cover) from the device. This step is not explicitly shown, but a picture without the battery cover shows the device post-battery removal.

  2. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店

    善于维修,即天赋异禀。

    与 #ImAGenius 分享您的维修故事

    我们都是天才

    与 #ImAGenius 分享您的维修故事

  3. Use a Philip's head screw driver to remove the screws from the case. Place the screws in a small container to avoid losing them.
    • Use a Philip's head screw driver to remove the screws from the case.

    • Place the screws in a small container to avoid losing them.

  4. Remove the front cover. First, insert a small pry bar where the black front cover and white back cover meet. Begin prying the black plastic up, slowing moving around to the bottom and other side.
    • Remove the front cover.

      • First, insert a small pry bar where the black front cover and white back cover meet.

      • Begin prying the black plastic up, slowing moving around to the bottom and other side.

      • At an angle, carefully pull up on the front cover separate the two pieces.

    • Excellent! Now you have removed the front cover!

结论

To reassemble your device, follow these instructions in reverse order.

Trey

于2012年03月09日注册

80 信誉积分

创作了2篇指南

团队

Clemson, Team 2-1, Benson Spring 2012 Clemson, Team 2-1, Benson Spring 2012 的会员

CLEM-BENSON-S12S2G1

3 名成员

创作了6篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 4

总计 1,428