危险
有潜在危险
如果不正确地执行这个步骤,就可能导致受伤。请保持谨慎并注意所有警告。
危险

简介

My autofocus bearings were stopped, I could focus only between min to 0.5m. This will show how to reach a part which moves the lens and makes it to zoom and focus.

Done by Rimvydas Gudeliauskas

配件

无需配件。

Take the lens away from camera
  • Take the lens away from camera

  • DO NOT FORGET: THAT YOU ARE DOING ALL ON YOUR OWN RESPONSIBILITY

添加评论

Unscrew the top part and detach it. Unjoin cables. Be careful; they're delicate, and easily torn.
  • Unscrew the top part and detach it.

  • Unjoin cables. Be careful; they're delicate, and easily torn.

    • Try to avoid contact with the sensitive electronic components.

  • Unfasten the screws that hold the circuit board in place, and separate it from the rest of the lens assembly.

添加评论

Take away zoom rubber and you will find srews
  • Take away zoom rubber and you will find srews

添加评论

Just take parts you need until you reach what you want to fix Zoom bearing can be taken away by unscrewing its srews.
  • Just take parts you need until you reach what you want to fix

  • Zoom bearing can be taken away by unscrewing its srews.

添加评论

Here is one of the parts which was broken, so I go to camera repair shop, and bought that parts. As this was not the only part broken, I had to leave for additional repair.
  • Here is one of the parts which was broken, so I go to camera repair shop, and bought that parts. As this was not the only part broken, I had to leave for additional repair.

  • When you finish you can put all back together

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

6等其他人完成本指南。

Rimvydas

于2012年03月29日注册

296 信誉积分

撰写一个指南

添加评论

浏览统计数据:

过去的24小时: 5

过去的7天: 33

过去的30天: 148

总计 23,810