Disassembling Power Mac G4 Cube Outer Case - iFixit 维修指南

本指南有最近更改，您可查看未经巡查的最新版本。

简介

It is the first step in repairing the internal components of the cube.

你所需要的

步骤 1 Outer Case

Disassembling Power Mac G4 Cube Outer Case, Outer Case: 步骤 1 中的图像 1，3

Disassembling Power Mac G4 Cube Outer Case, Outer Case: 步骤 1 中的图像 2，3

Disassembling Power Mac G4 Cube Outer Case, Outer Case: 步骤 1 中的图像 3，3

Release the back handle of the PowerMac. Slowly pull out the cube by holding the end of the handle. Watch for any parts that may become entangled with the outer case.
Push back the handle after you have taken the core out of the case.

步骤 2

Disassembling Power Mac G4 Cube Outer Case: 步骤 2 中的图像 1，2

Disassembling Power Mac G4 Cube Outer Case: 步骤 2 中的图像 2，2

Place the cube upside down and remove the four T10 Torx screws on the front plate. Then remove the two screws on each side.

步骤 3

Disassembling Power Mac G4 Cube Outer Case: 步骤 3 中的图像 1，1

Slowly lift the plate off the cube and disconnect the power cord.

步骤 4

Disassembling Power Mac G4 Cube Outer Case: 步骤 4 中的图像 1，1

Remove the four pillars from each corner.
The pillars should come out fairly easily.

结论

To reassemble your device, follow these instructions in reverse order.

8等其他人完成本指南。

作者

与6其他贡献者

Ryan Chun

于06/24/10注册

1,076 声望

创作了7篇指南

+ 10更多徽章

团队

Cal Poly, Team 2-7, Johann Summer 2010 Cal Poly, Team 2-7, Johann Summer 2010 的会员

CPSU-JOHANN-R10S2G7

5 名成员

创作了14篇指南

0条评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 7

过去 30 天： 17

总计 11,695