简介

Removing the casing is necessary to replace the LCD screen or the buttons.

配件

无需配件。

  1. Locate the battery cover on the bottom of the camera.
    • Locate the battery cover on the bottom of the camera.

  2. Place your thumb on the battery cover and push towards the arrow. The cover will release and pop open.
    • Place your thumb on the battery cover and push towards the arrow. The cover will release and pop open.

  3. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店

    善于维修,即天赋异禀。

    与 #ImAGenius 分享您的维修故事

    我们都是天才

    与 #ImAGenius 分享您的维修故事

  4. Remove the batteries from the camera.
    • Remove the batteries from the camera.

  5. Unscrew and remove four (3mm) screws on the right side of the camera. This will release the front and back casings.
    • Unscrew and remove four (3mm) screws on the right side of the camera. This will release the front and back casings.

  6. Use your nail or a flat object to pry up the edge of the front casing. Push the casing up and back.
    • Use your nail or a flat object to pry up the edge of the front casing. Push the casing up and back.

    • Repeat this step for the back casing.

结论

To reassemble your device, follow these instructions in reverse order.

Dani

于2010年06月24日注册

21 信誉积分

创作了7篇指南

团队

Cal Poly, Team 3-3, Johann Summer 2010 Cal Poly, Team 3-3, Johann Summer 2010 的会员

CPSU-JOHANN-R10S3G3

2 名成员

创作了7篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 1,445