跳转到主内容

简介

In this guide, the grip will be removed so the battery, wires, or board can be accessed.

工具

配件

没有特定配件。

  1. Remove the four screws from the grip with the 5/64" allen wrench. There are two on each side. Remove the four screws from the grip with the 5/64" allen wrench. There are two on each side.
    • Remove the four screws from the grip with the 5/64" allen wrench. There are two on each side.

  2. PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物

    PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物
  3. Pull the grip away from the frame. Pull the grip away from the frame.
    • Pull the grip away from the frame.

  4. Pull the grip through the opening. The grip is connected in the middle and is one piece.
    • Pull the grip through the opening.

    • The grip is connected in the middle and is one piece.

结论

To reassemble your device, follow these instructions in reverse order.

Rett Triplett

于2013年10月18日注册

801 信誉积分

创作了8篇指南

团队

Clemson, Team 13-6, Benson Fall 2013 Clemson, Team 13-6, Benson Fall 2013 的会员

CLEM-BENSON-F13S13G6

3 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 342