Disassembling Pentax PZ-10 Top Cover

简介

This guide is a prerequisite guide to enable access to features under the top casing for maintenance, repair, and replacement. The top cover encases the top features of the device except the flash and shutter button.

你所需要的

步骤 1 Top Cover

Disassembling Pentax PZ-10 Top Cover, Top Cover: 步骤 1 中的图像 1，1

The top cover is one piece encasing the top of the device except the shutter release button and flash.

编辑

步骤 2 Removing Upper Right Housing Screw

Disassembling Pentax PZ-10 Top Cover, Removing Upper Right Housing Screw: 步骤 2 中的图像 1，2

Disassembling Pentax PZ-10 Top Cover, Removing Upper Right Housing Screw: 步骤 2 中的图像 2，2

With the camera lens face down, locate the screw under the overhanging piece of the top casing on the right side of the back panel.
Using the J0 screwdriver, remove the 6.3 mm screw.

编辑

步骤 3 Removing Screw in Battery Compartment

Disassembling Pentax PZ-10 Top Cover, Removing Screw in Battery Compartment: 步骤 3 中的图像 1，2

Disassembling Pentax PZ-10 Top Cover, Removing Screw in Battery Compartment: 步骤 3 中的图像 2，2

Locate the next screw by holding the camera upside down with the battery compartment empty and face up.
Remove the 6.3 mm screw using a J0 screwdriver.

编辑

步骤 4 Removing Screw Under Flash Bulb

Disassembling Pentax PZ-10 Top Cover, Removing Screw Under Flash Bulb: 步骤 4 中的图像 1，2

Disassembling Pentax PZ-10 Top Cover, Removing Screw Under Flash Bulb: 步骤 4 中的图像 2，2

The next screw is found in the overhanging piece just above the lens.
With the top of the camera facing down, remove the 3.4 mm screw with a J0 screwdriver.

编辑