Disassembling Panasonic Lumix DMC-TZ5 Back Cover

简介

Since this is step one, you will just need to start with your camera.

你所需要的

步骤 1 Back Cover

Disassembling Panasonic Lumix DMC-TZ5 Back Cover, Back Cover: 步骤 1 中的图像 1，1

Remove the battery and memory card from the device.

编辑

步骤 2

Remove 4 screws from the right side of the camera.
There are two 3.4mm screws at the top.
There are two 2.2mm screws at the bottom.

编辑

步骤 3

Remove the single 3.4mm screw on the left side of the camera.

编辑

步骤 4

Remove 5 screws from the base of the camera.
There are two 2.2mm screws next to the battery compartment.
There are three 4mm screws around the tripod mount.

编辑

步骤 5

Slowly slide the back cover away from the device
The back casing is held in place by two ribbon cables. Do not pull the back cover too far from the camera.

编辑

步骤 6

Detach both ribbon cables using a spudger.
Use the tip of the spudger to lift the black clip upward, unlocking the ribbon cable.

编辑

步骤 7

Remove the back casing from the camera.

编辑

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

作者

与5其他贡献者

团队

Cal Poly, Team 9-21, Regan Fall 2010 Cal Poly, Team 9-21, Regan Fall 2010 的会员

CPSU-REGAN-F10S9G21

4 名成员

创作了14篇指南

一条评论

That is not a disassembly! All is shows is taking the back of the camera off. How about showing how to disassembly the camera down to its individual components and make repairs, like getting the lens to extend of fixing a sticking shutter.

JR Tan - 2018年5月8日回复

Disassembling Panasonic Lumix DMC-TZ5 Back Cover

简介

你所需要的

步骤 1 Back Cover

添加评论

步骤 2

添加评论

步骤 3

添加评论

步骤 4

添加评论

步骤 5

添加评论

步骤 6

添加评论

步骤 7

添加评论

作者

Ben Canfield

团队

Cal Poly, Team 9-21, Regan Fall 2010 Cal Poly, Team 9-21, Regan Fall 2010 的会员

一条评论

添加评论

嵌入本指南

预览