修复你的物品 社区 商店

Disassembling Palm Zire 72v1

已存档的指南
本指南只作为历史记录保留。请使用指南的最新版本来进行维修。

简介

A step by step guide for taking apart the Palm Zire 72v1. You will need this guide if you are planning to replace any of the internal components.

你所需要的

  1. Disassembling Palm Zire 72v1, Zire 72v1: 步骤 1 中的图像 1，1

    • Power off your Zire 72 and turn the unit over.

    翻译

    • Remove the two screws on the bottom of the rear of the unit.

    翻译

    • Peel back the information sticker.

    • Remove the one screw that connects the metal panel to the body of the Zire72.

    翻译

    • Use the tip of your screwdriver to pop the metal panel off the top of the rear of the unit to expose two more screws on the top corners.

    翻译

  6. Disassembling Palm Zire 72v1: 步骤 5 中的图像 1，2 Disassembling Palm Zire 72v1: 步骤 5 中的图像 2，2

    • Remove the two top screws.

    翻译

    • Insert the tip of your screwdriver in the seam where the front frame meets the body of the unit and pry the frame up to pop it off. Remove it.

    翻译

  8. Disassembling Palm Zire 72v1: 步骤 7 中的图像 1，1

    • Pull the back panel off the body of the unit to expose the motherboard in the body.

    翻译

    • Unplug the two orange ribbon cables at the top of the motherboard and remove the motherboard from the body. All that is left is the LCD screen in the front housing of the unit.

    翻译

  10. Disassembling Palm Zire 72v1: 步骤 9 中的图像 1，1

    • Remove the screen from the front housing and set it aside.

    翻译

    • Now that you have your Zire open, you can remove and replace the defective part.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与5其他贡献者

Lisa

于09/08/11注册

13 声望

撰写一个指南

徽章: 2

团队

University of Maine, Team 1-29, Diaz Fall 2011 University of Maine, Team 1-29, Diaz Fall 2011 的会员

UMAINE-DIAZ-F11S1G29

2 名成员

创作了1篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 1

总计 108