修复你的物品 社区 商店

Disassembling Olympus Stylus Tough-8010 Camera Casing

简介

Follow these instructions to learn how to remove the Olympus Stylus Tough-8010 camera's casing.

你所需要的

  1. Disassembling Olympus Stylus Tough-8010 Camera Casing, Camera Casing: 步骤 1 中的图像 1，3 Disassembling Olympus Stylus Tough-8010 Camera Casing, Camera Casing: 步骤 1 中的图像 2，3 Disassembling Olympus Stylus Tough-8010 Camera Casing, Camera Casing: 步骤 1 中的图像 3，3

    • Remove the front three screws (3.2mm) using a type T-6 head screwdriver.

    • Take off smaller front cover.

    • Carefully remove larger front cover.

    编辑

  2. Disassembling Olympus Stylus Tough-8010 Camera Casing: 步骤 2 中的图像 1，3 Disassembling Olympus Stylus Tough-8010 Camera Casing: 步骤 2 中的图像 2，3 Disassembling Olympus Stylus Tough-8010 Camera Casing: 步骤 2 中的图像 3，3

    • Remove two screws (4.1mm) on the top of the camera using a #000 Phillips head screwdriver.

    • Using a #000 Phillips head screwdriver remove two screws (7.9mm) near the control panel and set aside the metal connector.

    • Although the third photo shows the side panel casing being removed, it is normally secured by a screw under the front framework. You'll need to follow the next two steps to remove the framework and access the screw before you can remove the side casing as shown here.

    编辑

  4. Disassembling Olympus Stylus Tough-8010 Camera Casing: 步骤 3 中的图像 1，3 Disassembling Olympus Stylus Tough-8010 Camera Casing: 步骤 3 中的图像 2，3 Disassembling Olympus Stylus Tough-8010 Camera Casing: 步骤 3 中的图像 3，3

    • Using a #000 Philips head screwdriver remove the two screws (4.1mm) on the right side of the camera.

    • Remove two screws (4.1mm) on the bottom of the camera using a #000 head Phillips screwdriver.

    • Remove the single screw (3.2mm) on the front of the camera using a #000 Phillips head.

    编辑

  5. Disassembling Olympus Stylus Tough-8010 Camera Casing: 步骤 4 中的图像 1，2 Disassembling Olympus Stylus Tough-8010 Camera Casing: 步骤 4 中的图像 2，2

    • Carefully remove the font panel piece from the rest of the camera.

    • Carefully remove the top/side plastic piece.

    • If the the camera and flash buttons fall out of their slots set them aside.

    • If you haven't already done so, remove the side casing as mentioned in Step 3. It is secured by a single screw near the bottom corner.

    编辑

  6. Disassembling Olympus Stylus Tough-8010 Camera Casing: 步骤 5 中的图像 1，3 Disassembling Olympus Stylus Tough-8010 Camera Casing: 步骤 5 中的图像 2，3 Disassembling Olympus Stylus Tough-8010 Camera Casing: 步骤 5 中的图像 3，3

    • Remove four screws (9.4mm) on the front of the camera using a Phillips #000

    • Use the plastic opening tool to release the holding clip.

    • Using tweezers separate the plastic strips from their connectors located on the main circuit board by lifting the small, black flaps on the connectors and pulling on the ribbons.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

作者

与5其他贡献者

Luke Visser

于03/23/15注册

476 声望

创作了4篇指南

徽章: 8

+ 5更多徽章

团队

Baylor, Team 7-15, Williams Spring 2015 Baylor, Team 7-15, Williams Spring 2015 的会员

BU-WILLIAMS-S15S7G15

3 名成员

创作了12篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 3

过去 30 天： 21

总计 918