Olympus Stylus 410 Slider Replacement

当前版本的文档还未经巡查，您可以查看最新的已查核版本。

你所需要的

步骤 1

这个步骤还没有翻译帮忙翻译一下

Locate the 2 screws on the bottom of the slider.
Remove both screws with a #00 Phillips screwdriver.

翻译

步骤 2

这个步骤还没有翻译帮忙翻译一下

Gently pull on the bottom of the slider until it comes off the lower track.
There is a little piece that connects the slider to the track. Be sure not to lose this as it is needed to put the slider back on.

翻译

步骤 3

这个步骤还没有翻译帮忙翻译一下

Lift the slider up until it comes off the upper track.

翻译

步骤 4

这个步骤还没有翻译帮忙翻译一下

The slider should now be free from the body of the camera.

翻译

终点

另外一个人完成了本指南。

作者

与5其他贡献者

团队

Cal Poly, Team 6-13, Maness Spring 2010 Cal Poly, Team 6-13, Maness Spring 2010 的会员

CPSU-MANESS-S10S6G13

5 名成员

创作了17篇指南

2条评论

Camera would not turn on nor lens extend. Took slider off per instructions and cleaned the switch and was able to rotate switch back and forth to turn camera on and off by hand. Reassembled slider and could turn camera on but not off. Disassembled again and find the rotating switch is permanently stuck in counter clockwise position and cannot be activated by hand. I do not want to force the switch because it did operate very easy. What can be the trouble?

rraff8300@sbcglobal.net

Richard Rafferty - 2017年11月26日回复

Excellent instructions for removing stylist 410 slider. Hope you can help with my prior stuck switch problem.

Richard Rafferty - 2017年11月26日回复

你所需要的

步骤 1

添加评论

步骤 2

添加评论

步骤 3

添加评论

步骤 4

添加评论

作者

Jared Ruekberg

团队

Cal Poly, Team 6-13, Maness Spring 2010 Cal Poly, Team 6-13, Maness Spring 2010 的会员

2条评论

添加评论

嵌入本指南

预览