简介

We will now disassemble the guts of the phone, including the SIM card reader, vibrating unit, power toggle button, audio speaker, power assembly/microphone, and the battery connector.

配件

无需配件。

Hold the phone and push the white button with your thumb. While pressing the button, slide the back plate up (towards the top of the phone) and off the phone. While pressing the button, slide the back plate up (towards the top of the phone) and off the phone.
  • Hold the phone and push the white button with your thumb.

  • While pressing the button, slide the back plate up (towards the top of the phone) and off the phone.

添加评论

Locate grey buttons beneath battery (shown). Spread buttons simultaneously away from each other and the battery will pop out.
  • Locate grey buttons beneath battery (shown).

  • Spread buttons simultaneously away from each other and the battery will pop out.

  • Remove battery from phone.

添加评论

Where shown, spread the front faceplate and push forward. Flip over the device, and pry the faceplate away.
  • Where shown, spread the front faceplate and push forward.

  • Flip over the device, and pry the faceplate away.

添加评论

Remove six T6 screws. Remove six T6 screws.
  • Remove six T6 screws.

添加评论

Insert spudger between screen assembly and phone body. Spread apart as shown. Avoid damaging the screen assembly by removing the screen slowly.
  • Insert spudger between screen assembly and phone body.

  • Spread apart as shown. Avoid damaging the screen assembly by removing the screen slowly.

添加评论

Remove logic board as shown. Remove logic board as shown.
  • Remove logic board as shown.

添加评论

Use the following legend to locate each component:
    • Use the following legend to locate each component:

      • Microphone/power assembly.

      • Vibrating unit.

      • SIM card reader.

      • Audio speaker.

      • Power toggle button.

      • Battery connector.

添加评论

Insert spudger between power assembly/micro-phone and phone body. Pry as shown and remove the power assembly/microphone.
  • Insert spudger between power assembly/micro-phone and phone body.

  • Pry as shown and remove the power assembly/microphone.

添加评论

Once located, the following components are easily removed by pulling them out with your hand.
  • Once located, the following components are easily removed by pulling them out with your hand.

    • Microphone/power assembly.

    • Vibrating unit.

    • SIM card reader.

    • Audio speaker.

    • Power toggle button.

    • Battery connector.

添加评论

Audio speaker. Audio speaker.
  • Audio speaker.

添加评论

SIM card reader. SIM card reader.
  • SIM card reader.

添加评论

Vibrating unit. Vibrating unit.
  • Vibrating unit.

添加评论

Power toggle button. Power toggle button.
  • Power toggle button.

添加评论

Battery connector. Battery connector.
  • Battery connector.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Nico Lee

于2010年04月19日注册

54 信誉积分

创作了11篇指南

团队

Cal Poly, Team 30-41, Garner Spring 2010 Cal Poly, Team 30-41, Garner Spring 2010 的会员

CPSU-GARNER-S10S30G41

4 名成员

创作了11篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 2,736