修复你的物品 社区 商店

本指南有最近更改，您可查看未经巡查的最新版本。

Disassembling Nintendo DSi Bottom case

已存档的指南
本指南只作为历史记录保留。请使用指南的最新版本来进行维修。

简介

This guide has been updated by iFixit staff! Read the new, official guide here.

A guide on how to disassemble the bottom case assembly, including removing the LCD and buttons.

你所需要的

  1. 注意：步骤 1-2 源自标记为进行中的 指南。

    Disassembling Nintendo DSi Bottom case, Battery: 步骤 1 中的图像 1，1

    • Loosen the two screws on the battery panel. Then lift the panel up to remove it.

    翻译

  2. Disassembling Nintendo DSi Bottom case: 步骤 2 中的图像 1，1

    • L Button.

    • Top of the battery pack.

    • To remove the battery pack, place your fingernail or a spudger at the top of the battery near the L button. Gently lift the battery out.

    翻译

  3. 注意：步骤 3-4 源自标记为进行中的 指南。

    Disassembling Nintendo DSi Bottom case, Motherboard: 步骤 3 中的图像 1，2 Disassembling Nintendo DSi Bottom case, Motherboard: 步骤 3 中的图像 2，2

    • Remove 4 Phillips screws from the board.

    • Lift the main board from the bottom end and flip it over to reveal the last connector.

    • Keep the main board fairly close to the case, making sure not to damage the last ribbon cable holding it in place.

    翻译

  5. Disassembling Nintendo DSi Bottom case: 步骤 4 中的图像 1，1

    • Disconnect the ribbon cable by gently using a plastic opening tool to flip up the black connector latch. The cable should easily slide out from the connector.

    • The motherboard should now be free from the rest of the device.

    翻译

  6. Disassembling Nintendo DSi Bottom case, Disassembling Nintendo DSi Bottom case: 步骤 5 中的图像 1，1

    • Remove the rubber front-panel button membranes from the device. Pay careful attention to where the buttons go, so you can replace them correctly.

    • A/B/X/Y button assembly

    • Select/Start button assembly

    • D-pad

    • Power button

    翻译

  7. Disassembling Nintendo DSi Bottom case: 步骤 6 中的图像 1，2 Disassembling Nintendo DSi Bottom case: 步骤 6 中的图像 2，2

    • Remove the plastic buttons and keep them in a safe place.

    • All of the buttons have "key" notches to prevent them from being inserted incorrectly (backwards or in the wrong place), but it can take a while to figure out where everything goes if they get shuffled around.

    翻译

  8. Disassembling Nintendo DSi Bottom case: 步骤 7 中的图像 1，2 Disassembling Nintendo DSi Bottom case: 步骤 7 中的图像 2，2

    • Flip the case open, and push the lower screen assembly out of the frame.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与14其他贡献者

rjcamero

于11/05/09注册

50 声望

创作了3篇指南

徽章: 8

+ 5更多徽章

团队

Cal Poly, Team 6-1, Maness Fall 2009 Cal Poly, Team 6-1, Maness Fall 2009 的会员

CPSU-MANESS-F09S6G1

5 名成员

创作了4篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 9

总计 5,335