1. Remove the screws from the bottom, right, and left side of camera.
    • Remove the screws from the bottom, right, and left side of camera.

    添加评论

  2. Remove the back of the camera, may require force.
    • Remove the back of the camera, may require force.

    添加评论

    • Unscrew the right metal bracket of the viewing lens

    添加评论

    • Unscrew the top right corner screw

    添加评论

    • Unscrew the bottom right corner screw.

    添加评论

    • Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Pull the front of the camera off of the mother board.

    添加评论

    • Unscrew the grey plastic around the screen

    添加评论

    • Twist the grey bracket counterclockwise to remove it from the silver LCD bracket.

    添加评论

    • Maneuver to detach the flash bulb.

    添加评论

    • Unscrew the metal bracket under the lens

    添加评论

    • Slide the plastic bracket through the metal bracket.

    添加评论

    • Remove the orange cable from the motherboard.

    添加评论

    • Pull the black tape off.

    添加评论

    • Unscrew the two screws underneath.

    添加评论

    • Remove lens

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Crista Riedy

于2013年02月12日注册

406 信誉积分

创作了3篇指南

团队

Ohio State, Team 1-2, Buehl Spring 2013 Ohio State, Team 1-2, Buehl Spring 2013 的会员

OSU-BUEHL-S13S1G2

2 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 7

总计 521