简介

Disassembling top half to get to connector ribbon, inside screen, and speaker.

  1. Pull at top of faceplate, and it will pop off.
    • Pull at top of faceplate, and it will pop off.

    添加评论

  2. Unscrew four screws on front cover.
    • Unscrew four screws on front cover.

    添加评论

    • Slide out metallic silver cover.

    • This piece is wedged in tight. Try to slide out one hook at a time, instead of both simultaneously.

    添加评论

    • Use a tool to wedge in between the silver and black parts on the cover.

    • Silver part should now snap off.

    添加评论

    • Black rubber part may now be easily removed.

    添加评论

    • Use a soldering iron to disconnect the connector ribbon from the phone.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Tyler Knisley

于2010年05月07日注册

1 信誉积分

创作了7篇指南

团队

Cal Poly, Team 6-16, Maness Spring 2010 Cal Poly, Team 6-16, Maness Spring 2010 的会员

CPSU-MANESS-S10S6G16

4 名成员

创作了14篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 2,517