跳转到主内容

你所需要的

  1. Disassembling Meyer Sound MM-4 Ultra Compact Wide-Range Loudspeaker Case, Case: 步骤 1 中的图像 1,2 Disassembling Meyer Sound MM-4 Ultra Compact Wide-Range Loudspeaker Case, Case: 步骤 1 中的图像 2,2
    • Turn the speaker face down, so the connector side is up.

    • Remove the four #2 Philips screws on the back plate.

  2. Disassembling Meyer Sound MM-4 Ultra Compact Wide-Range Loudspeaker Case: 步骤 2 中的图像 1,1
    • Remove the foam insert to expose the two spade connectors.

    • Carefully separate the connectors

  3. Disassembling Meyer Sound MM-4 Ultra Compact Wide-Range Loudspeaker Case: 步骤 3 中的图像 1,2 Disassembling Meyer Sound MM-4 Ultra Compact Wide-Range Loudspeaker Case: 步骤 3 中的图像 2,2
    • Turn the speaker so the grill side is up.

    • Remove the four screws on the grill. I had to use a t-10 Torx bit to remove them.

    • The grill is not glued on, but may require a bit of prying to remove.

  4. Disassembling Meyer Sound MM-4 Ultra Compact Wide-Range Loudspeaker Case: 步骤 4 中的图像 1,2 Disassembling Meyer Sound MM-4 Ultra Compact Wide-Range Loudspeaker Case: 步骤 4 中的图像 2,2
    • Remove the four silver bolts holding the speaker in place. These bolts also have threads inset for the grill screws to fit into.

    • This is a pretty quick and easy teardown, not too many parts in this one. The meyer speaker's part number is ST-164. It's a 16 Ohm driver.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

RoggeSound

于2010年06月05日注册

2,294 声望

撰写一个指南

2条评论

So I took one of my MM-4 apart because something was rattling. Turns out it has a loose magnet assembly. It must have been dropped in shipping.

Garrett McWilliams - 回复

Do you by any chance still have it?

I have two of them already and with some zipties and rubber they sound great again…

Would you by any chance ship the broken driver over to me?

Jan Marius -

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 4

过去 30 天: 23

总计 6,535