简介

There are a lot of items behind the dash board of a W123 that may eventually need service, anything from various relays, to one of several vacuum actuators for the climate control vents and flaps.

One way to get easier access to several of these parts is to remove the glove box liner. Learn how here.

  1. Start by opening the glove box.
    • Start by opening the glove box.

    添加评论

  2. Remove the two phillips screws in the glove box door catch, then remove it.
    • Remove the two phillips screws in the glove box door catch, then remove it.

    添加评论

    • Gently pry apart the expansion plug in the glove box clips. There will be a row of them on top, and on the bottom.

    • Once you've pried it out part of the way you can pull it the rest of the way out by hand, or gently with needle nose pliers.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • You can then pry the clips out of the liner. Remove them all.

    添加评论

    • Gently pry down the cover for the glove box lamp.

    添加评论

    • Now unplug the two connections from the lamp and remove the lamp housing.

    • Be sure to make note of the orientation of the two wires for re-installation.

    添加评论

    • Now the glove box liner will pull out by hand.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Nicolas Siemsen

于2013年12月06日注册

29,484 信誉积分

创作了79篇指南

团队

Master Techs Master Techs 的会员

Community

279 名成员

创作了758篇指南

添加评论

浏览统计数据:

过去的24小时: 5

过去的7天: 22

过去的30天: 69

总计 5,805