Disassembling Marshall MS-2 Micro Amp Case Disassembly - iFixit 维修指南

你所需要的

步骤 1 Disassembling Marshall MS-2 Micro Amp Case Disassembly

Disassembling Marshall MS-2 Micro Amp Case Disassembly, Disassembling Marshall MS-2 Micro Amp Case Disassembly: 步骤 1 中的图像 1，1

First be sure to turn the power switch to the off position.
Do this by turning the leftmost knob counter-clockwise as until the line points to "off."

步骤 2

Disassembling Marshall MS-2 Micro Amp Case Disassembly: 步骤 2 中的图像 1，3

Disassembling Marshall MS-2 Micro Amp Case Disassembly: 步骤 2 中的图像 2，3

Disassembling Marshall MS-2 Micro Amp Case Disassembly: 步骤 2 中的图像 3，3

Now remove the battery.
On the back of the device locate the battery cover.
Remove it by pushing down on the clip.
Then pull the piece of fabric until the battery comes out.

步骤 3

Disassembling Marshall MS-2 Micro Amp Case Disassembly: 步骤 3 中的图像 1，2

Disassembling Marshall MS-2 Micro Amp Case Disassembly: 步骤 3 中的图像 2，2

Use the long, skinny phillips head screwdriver to remove the 4 7/16" screws on the back of the device in the four corners.
Once unscrewed, do not try to take each screw out. Move to next step once all screwed have been unscrewed.

步骤 4

Disassembling Marshall MS-2 Micro Amp Case Disassembly: 步骤 4 中的图像 1，1

Now pull the back panel off and place it down as shown. Pull the panel straight up so you do not lose the screws.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与5其他贡献者

MacKinley

于10/22/13注册

811 声望

创作了5篇指南

+ 7更多徽章

团队

University of Maryland, Team 1-1, Shastany Fall 2013 University of Maryland, Team 1-1, Shastany Fall 2013 的会员

UMD-SHASTANY-F13S1G1

3 名成员

创作了5篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 5

总计 2,041