跳转到主内容

Disassembling Kodak Advantix F350 Display

你所需要的

  1. Disassembling Kodak Advantix F350 Display, Back Cover: 步骤 1 中的图像 1,1
    • Turn off the camera.

    • Locate the power switch on the front of the camera below the camera lens.

    • Slide the switch to the off position.

  2. Disassembling Kodak Advantix F350 Display: 步骤 2 中的图像 1,2 Disassembling Kodak Advantix F350 Display: 步骤 2 中的图像 2,2
    • Locate the 3 screws that hold the back cover to the camera.

    • One screw is located on the film opener side of the camera.

    • The other screws are located on the opposite side of the camera.

  3. Disassembling Kodak Advantix F350 Display: 步骤 3 中的图像 1,3 Disassembling Kodak Advantix F350 Display: 步骤 3 中的图像 2,3 Disassembling Kodak Advantix F350 Display: 步骤 3 中的图像 3,3
    • Use the Phillips #00 Precision Screwdriver and remove the screws on the back cover.

  4. Disassembling Kodak Advantix F350 Display: 步骤 4 中的图像 1,2 Disassembling Kodak Advantix F350 Display: 步骤 4 中的图像 2,2
    • Open the film door to remove the back cover.

    • Slide the film door lever to the left until the film door opens.

  5. Disassembling Kodak Advantix F350 Display: 步骤 5 中的图像 1,2 Disassembling Kodak Advantix F350 Display: 步骤 5 中的图像 2,2
    • Use a plastic opening tool to pry the case open until a small gap is present.

    • Repeat this process at the top and bottom of the film door to loosen it.

  6. Disassembling Kodak Advantix F350 Display: 步骤 6 中的图像 1,3 Disassembling Kodak Advantix F350 Display: 步骤 6 中的图像 2,3 Disassembling Kodak Advantix F350 Display: 步骤 6 中的图像 3,3
    • Grab the top and bottom of the case firmly as shown.

    • Gently remove the back of the camera case with a slight twisting motion.

  7. Disassembling Kodak Advantix F350 Display, Front Cover: 步骤 7 中的图像 1,2 Disassembling Kodak Advantix F350 Display, Front Cover: 步骤 7 中的图像 2,2
    • Locate the 3 screws on the camera that hold the front cover of the camera to the camera body.

    • The first 2 are located on the bottom of the camera.

    • The last screw is located behind the flash module.

    • Turn the camera on, and raise the flash module to locate the flash module screw.

  8. Disassembling Kodak Advantix F350 Display: 步骤 8 中的图像 1,2 Disassembling Kodak Advantix F350 Display: 步骤 8 中的图像 2,2
    • Remove the 2 screws at the base of the camera housing.

    • Use the Phillips #00 Precision Screwdriver and remove the screws.

    • Repeat this process for the screw behind the flash module.

  9. Disassembling Kodak Advantix F350 Display: 步骤 9 中的图像 1,2 Disassembling Kodak Advantix F350 Display: 步骤 9 中的图像 2,2
    • Remove the screw located under the flash module using the Phillips #00 Precision Screwdriver.

  10. Disassembling Kodak Advantix F350 Display: 步骤 10 中的图像 1,2 Disassembling Kodak Advantix F350 Display: 步骤 10 中的图像 2,2
    • Remove the flash cover.

    • Remove the flash module by twisting it up and outward of the camera housing.

    • The cover can now be be removed.

  11. Disassembling Kodak Advantix F350 Display: 步骤 11 中的图像 1,2 Disassembling Kodak Advantix F350 Display: 步骤 11 中的图像 2,2
    • Remove the film door lever.

    • Remove the screw holding the film lever in place by using a Phillips #00 Precision Screwdriver.

    • Using a plastic opening tool, gently pry the switch upwards to remove it.

  12. Disassembling Kodak Advantix F350 Display: 步骤 12 中的图像 1,1
    • Open the battery door by pushing the lever towards the arrow indicated.

  13. Disassembling Kodak Advantix F350 Display: 步骤 13 中的图像 1,3 Disassembling Kodak Advantix F350 Display: 步骤 13 中的图像 2,3 Disassembling Kodak Advantix F350 Display: 步骤 13 中的图像 3,3
    • Remove the front cover.

    • Insert your thumb in the film hole and gently pry the bottom loose.

    • Once the front is loose, gently pull it out.

  14. Disassembling Kodak Advantix F350 Display, Display: 步骤 14 中的图像 1,1
    • Locate the 3 screws on the top of the camera.

    • These will be removed in the next step.

  15. Disassembling Kodak Advantix F350 Display: 步骤 15 中的图像 1,3 Disassembling Kodak Advantix F350 Display: 步骤 15 中的图像 2,3 Disassembling Kodak Advantix F350 Display: 步骤 15 中的图像 3,3
    • Remove the 3 screws using the Phillips #00 Precision Screwdriver.

  16. Disassembling Kodak Advantix F350 Display: 步骤 16 中的图像 1,2 Disassembling Kodak Advantix F350 Display: 步骤 16 中的图像 2,2
    • Remove the LCD.

    • Gently pry the LCD and plastic bezel upward with a plastic opening tool.

    • Remove LCD and replace as needed.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

团队

UW Stout, Team 1-2, Zhou Fall 2011 UW Stout, Team 1-2, Zhou Fall 2011 的会员

UWSTOUT-ZHOU-F11S1G2

4 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 3

过去 30 天: 11

总计 1,065