修复你的物品 社区 商店

Disassembling KitchenAid Classic Mixer K45SSWH Motor Housing Cover

简介

In this guide, you will learn how to disassemble the motor housing cover.

你所需要的

  1. Disassembling KitchenAid Classic Mixer K45SSWH Motor Housing Cover, Motor Housing Cover: 步骤 1 中的图像 1，2 Disassembling KitchenAid Classic Mixer K45SSWH Motor Housing Cover, Motor Housing Cover: 步骤 1 中的图像 2，2

    • Using a spudger, gently pry off the aluminum drip ring.

    编辑

  2. Disassembling KitchenAid Classic Mixer K45SSWH Motor Housing Cover: 步骤 2 中的图像 1，1

    • Using a 4 mm pin punch and hammer, hammer the pin until it is dislodged from the planetary gear cover.

    编辑

  3. Disassembling KitchenAid Classic Mixer K45SSWH Motor Housing Cover: 步骤 3 中的图像 1，2 Disassembling KitchenAid Classic Mixer K45SSWH Motor Housing Cover: 步骤 3 中的图像 2，2

    • Using a spudger, pry the planetary gear cover from the mixer shaft.

    编辑

  5. Disassembling KitchenAid Classic Mixer K45SSWH Motor Housing Cover: 步骤 4 中的图像 1，1

    • Using a flathead screwdriver, remove the five 28 mm front motor housing screws.

    • Using the same flathead screwdriver, remove the two 28 mm locking screws.

    • One of the locking screws contains a safety locking mechanism. Do not interchange these screws with the front motor housing screws.

    编辑

  6. Disassembling KitchenAid Classic Mixer K45SSWH Motor Housing Cover: 步骤 5 中的图像 1，1

    • Turn your device around. Using the same flathead screwdriver, remove the two 28 mm rear locking screws.

    • One of the rear motor housing screws contains a safety locking mechanism. Do not interchange these screws with the front motor housing screws.

    编辑

  7. Disassembling KitchenAid Classic Mixer K45SSWH Motor Housing Cover: 步骤 6 中的图像 1，2 Disassembling KitchenAid Classic Mixer K45SSWH Motor Housing Cover: 步骤 6 中的图像 2，2

    • Using a Phillips #2 screwdriver, remove the 10 mm screw from top of back cover.

    • The rear cover is now completely free from the mixer.

    编辑

  8. Disassembling KitchenAid Classic Mixer K45SSWH Motor Housing Cover: 步骤 7 中的图像 1，2 Disassembling KitchenAid Classic Mixer K45SSWH Motor Housing Cover: 步骤 7 中的图像 2，2

    • Carefully pull the power cord from the notch in back of the mixer.

    • The motor housing cover is now completely free from the base of the mixer.

    编辑

  9. Disassembling KitchenAid Classic Mixer K45SSWH Motor Housing Cover: 步骤 8 中的图像 1，1

    • Lift the motor housing cover from the mixer base.

    • Be sure to place the cover upside-down to prevent grease from leaking out.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

32等其他人完成本指南。

作者

与5其他贡献者

Chris Gonzales

于10/12/14注册

1,519 声望

创作了2篇指南

徽章: 21

+ 18更多徽章

团队

Cal Poly, Team 14-28, Maness Fall 2014 Cal Poly, Team 14-28, Maness Fall 2014 的会员

CPSU-MANESS-F14S14G28

4 名成员

创作了22篇指南

24条评论

Well fine job! Just finished and t works!!!

James Anderson - 回复

Instruccion is exelent but I veleave the problem is electric. can you give aidea. dhe machine does’nt work at all

Aristides Aleman - 回复

Thank you! I'm repainting my white mixer a deep cherry red gloss to match my kitchen. These mixers can last 20+ years, if you take care of them. But, who wants the same color kitchen for that long? Bonus: saved $50+ by painting it the color I wanted, rather than pay the extra for a mixer from the colored choices.

Heather Schrader - 回复

Do the motor housing sometimes become to hard to remove? I followed all the steps yet it still acts as if something inside the housing is keeping it from coming off.

Royce M - 回复

Nothing else, only the planetary assembly, and the 9 big housing screws. Once those are off, it can take a lot of jiggling and persistence, mostly because there’s a vacuum between the vertical shaft and the bushing inside. Remember to loosen the cord in case to prevent yanking it accidentally when the cover comes off.

Ariel Cornejo -

添加评论

浏览统计数据:

过去 24 小时： 29

过去 7 天： 266

过去 30 天： 1,332

总计 95,762