Disassembling Kinivo ZX100 Mini Portable Speaker - iFixit 维修指南

简介

Prerequisite only.

你所需要的

步骤 1 Disassembling Kinivo ZX100 Mini Portable Speaker

Disassembling Kinivo ZX100 Mini Portable Speaker, Disassembling Kinivo ZX100 Mini Portable Speaker: 步骤 1 中的图像 1，1

Open the circular portion at the top of the speaker by twisting it until it reaches the maximum possible height.
Make sure it is twisted fully, as this will allow access to four screws to be removed in the next step.

步骤 2

Disassembling Kinivo ZX100 Mini Portable Speaker: 步骤 2 中的图像 1，2

Disassembling Kinivo ZX100 Mini Portable Speaker: 步骤 2 中的图像 2，2

Remove the four 12 mm Phillips screws from the enclosure.

步骤 3

Disassembling Kinivo ZX100 Mini Portable Speaker: 步骤 3 中的图像 1，2

Disassembling Kinivo ZX100 Mini Portable Speaker: 步骤 3 中的图像 2，2

Separate the resonator portion from the base of device to reveal the middle separator of the enclosure. The enclosure will now be in two pieces.
Hold the resonator portion of the enclosure gently aside to make sure there is no tension on the black and red wires coming from the bottom portion of the device.
Excessive force may disconnect the black and red speaker wires from the circuitry in the bottom portion of the device.

步骤 4

Disassembling Kinivo ZX100 Mini Portable Speaker: 步骤 4 中的图像 1，1

Separate the very bottom portion of the enclosure (marked in red) by pulling vertically on the red portion of the enclosure (marked in orange).
Gently set the very bottom portion and the resonator section aside once they have both been separated.
Remove the circuit board with your hands by lifting and sliding the board away from the LED indicator.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与9其他贡献者

Laura Dion

于03/26/15注册

143 声望

撰写一个指南

+ 6更多徽章

团队

UMass Dartmouth, Team 1-5, Shastany Spring 2015 UMass Dartmouth, Team 1-5, Shastany Spring 2015 的会员

UMASSD-SHASTANY-S15S1G5

4 名成员

创作了4篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 4

过去 30 天： 4

总计 83