Disassembling Keurig Mini B-31 Arm - iFixit 维修指南

你所需要的

步骤 1 Arm

Disassembling Keurig Mini B-31 Arm, Arm: 步骤 1 中的图像 1，1

With the needle removed, open the device by pulling up on the handle.

步骤 2

Disassembling Keurig Mini B-31 Arm: 步骤 2 中的图像 1，3

Disassembling Keurig Mini B-31 Arm: 步骤 2 中的图像 2，3

Disassembling Keurig Mini B-31 Arm: 步骤 2 中的图像 3，3

Push in on one of the arms attached to the K-cup holder plastic housing to remove it from its rails. The arms are identical for both sides so once one side is free repeat the process for the second side.
The plastic is flexible and will not snap with the force applied.
Once the arms are removed, the configuration should look like the picture. The K-cup holder housing should be separated from the arms.

步骤 3

Disassembling Keurig Mini B-31 Arm: 步骤 3 中的图像 1，1

Use a Phillips #1 screw driver to remove the four 12 mm screws that hold the arm assembly in place.

步骤 4

Disassembling Keurig Mini B-31 Arm: 步骤 4 中的图像 1，2

Disassembling Keurig Mini B-31 Arm: 步骤 4 中的图像 2，2

Lift up the arm and pull up the handle assembly. It should easily come off.
This white tab falls off easily, remove it and set it aside to ensure it is not lost.

结论

To reassemble your device, follow these instructions in reverse order.

作者

与4其他贡献者

Andrew Adriance

于01/14/14注册

1,914 声望

创作了7篇指南

+ 11更多徽章

团队

Cal Poly, Team 17-1, Forte Winter 2014 Cal Poly, Team 17-1, Forte Winter 2014 的会员

CPSU-FORTE-W14S17G1

5 名成员

创作了17篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 68