Introduction

These instructions will demonstrate how to remove the SD card slot from the KDDI Kyocera A5521K.

Parts

No parts required.

  1. Turn the phone over to expose the battery cover.
    • Turn the phone over to expose the battery cover.

    • Apply pressure to the back of the battery cover to slide it down.

    • The battery cover is now separate from the phone.

    Add Comment

  2. Remove the battery by pushing it up and out from the bottom.
    • Remove the battery by pushing it up and out from the bottom.

    • The battery, cover, and phone should now be separated.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the four screws with the Y0 screwdriver.

    Add Comment

    • Remove the black, rubber screw caps towards the top of the back of the phone to reveal two additional screws.

    • Remove the two screws with a Y0 screwdriver.

    Add Comment

    • Rotate the phone 180 degrees.

    • Carefully separate the back plate from the remainder of the phone.

    • The back plate should now be detached from the rest of the phone.

    Add Comment

    • Rotate the phone approximately 45 degrees to the right.

    • Gently pry up the SD card slot with a spudger.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Dominic Grisafe

Member since: 04/15/2010

157 Reputation

10 Guides authored

Team

Cal Poly, Team 28-25, Regan Spring 2010 Member of Cal Poly, Team 28-25, Regan Spring 2010

CPSU-REGAN-S10S28G25

4 Members

20 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 2,796