简介

These instructions will demonstrate how to remove the SD card slot from the KDDI Kyocera A5521K.

配件

无需配件。

  1. Turn the phone over to expose the battery cover.
    • Turn the phone over to expose the battery cover.

    • Apply pressure to the back of the battery cover to slide it down.

    • The battery cover is now separate from the phone.

    添加评论

  2. Remove the battery by pushing it up and out from the bottom.
    • Remove the battery by pushing it up and out from the bottom.

    • The battery, cover, and phone should now be separated.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the four screws with the Y0 screwdriver.

    添加评论

    • Remove the black, rubber screw caps towards the top of the back of the phone to reveal two additional screws.

    • Remove the two screws with a Y0 screwdriver.

    添加评论

    • Rotate the phone 180 degrees.

    • Carefully separate the back plate from the remainder of the phone.

    • The back plate should now be detached from the rest of the phone.

    添加评论

    • Rotate the phone approximately 45 degrees to the right.

    • Gently pry up the SD card slot with a spudger.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Dominic Grisafe

于2010年04月15日注册

157 信誉积分

创作了10篇指南

团队

Cal Poly, Team 28-25, Regan Spring 2010 Cal Poly, Team 28-25, Regan Spring 2010 的会员

CPSU-REGAN-S10S28G25

4 名成员

创作了20篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 2,796