简介

These instructions will demonstrate how to remove the main LCD screen from the KDDI Kyocera A5521K.

Pry, with a metal probe, the black covers that are located by the pivoting joints of the phone. Beneath the covers are screws. Beneath the covers are screws.
  • Pry, with a metal probe, the black covers that are located by the pivoting joints of the phone.

    • Beneath the covers are screws.

添加评论

Remove the screws using a Y0 screwdriver.
  • Remove the screws using a Y0 screwdriver.

添加评论

Use the iPod pry tool to remove the outer screen. Two screws are now visible. Be careful not to crack the screen upon removal.  It is adhered strongly to the phone.
  • Use the iPod pry tool to remove the outer screen.

    • Two screws are now visible.

    • Be careful not to crack the screen upon removal. It is adhered strongly to the phone.

添加评论

Use the Y0 screwdriver to remove the screws.
  • Use the Y0 screwdriver to remove the screws.

添加评论

Use the iPod pry tool to loosen the faceplate from the phone. Slide the pry tool along the entire crease of the faceplate to completely detach it.
  • Use the iPod pry tool to loosen the faceplate from the phone.

    • Slide the pry tool along the entire crease of the faceplate to completely detach it.

添加评论

Mac RAM 套件
加速你的Mac。充分利用它的内存。
Mac RAM 套件
从Mac中清理出更多内存。
Separate the faceplate from the phone. Separate the faceplate from the phone. Separate the faceplate from the phone.
  • Separate the faceplate from the phone.

添加评论

Firmly grab the flexible circuit with tweezers to detach (or use your fingers if you can manage a firm grip). Firmly grab the flexible circuit with tweezers to detach (or use your fingers if you can manage a firm grip).
  • Firmly grab the flexible circuit with tweezers to detach (or use your fingers if you can manage a firm grip).

添加评论

Carefully pry up the camera unit with a spudger. Be careful not to damage the camera unit. The camera should now be separated from the phone.
  • Carefully pry up the camera unit with a spudger.

    • Be careful not to damage the camera unit.

    • The camera should now be separated from the phone.

添加评论

Remove the flexible circuit shown using tweezers (or use your fingers if you can manage a firm grip). Remove the flexible circuit shown using tweezers (or use your fingers if you can manage a firm grip).
  • Remove the flexible circuit shown using tweezers (or use your fingers if you can manage a firm grip).

添加评论

Unplug the circuit connector. Unplug the circuit connector.
  • Unplug the circuit connector.

添加评论

Grab the phone with both hands. Turnover the phone so that the main screen faces you. Firmly grasp the edges between your thumbs and fingers.
  • Grab the phone with both hands.

  • Turnover the phone so that the main screen faces you.

  • Firmly grasp the edges between your thumbs and fingers.

  • Carefully push in the LCD screen from the remainder of the phone.

    • Be careful not to break the LCD screen.

添加评论

The LCD screen and circuit board should now be partly detached from the frame. The LCD screen and circuit board should now be partly detached from the frame.
  • The LCD screen and circuit board should now be partly detached from the frame.

添加评论

Turn over the phone. Separate the circuit board from the back of the LCD screen.
  • Turn over the phone.

  • Separate the circuit board from the back of the LCD screen.

添加评论

Remove the LCD screen from the phone. Remove the LCD screen from the phone. Remove the LCD screen from the phone.
  • Remove the LCD screen from the phone.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Dominic Grisafe

于2010年04月15日注册

133 信誉积分

创作了20篇指南

团队

Cal Poly, Team 28-25, Regan Spring 2010 Cal Poly, Team 28-25, Regan Spring 2010 的会员

CPSU-REGAN-S10S28G25

4 名成员

创作了20篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 1

总计 1,524