简介
The disassembly of the rear cover is simple but requires the removal of a lot of screws.
你所需要的
-
-
Use a Phillips #0 screwdriver to remove the twenty screws on the underside of the T42.
-
-
-
-
Remove the four Phillips screws located on either side of the rear of the T42 (there are two on each end.)
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
另外一个人完成了本指南。
团队
Cal Poly, Team 29-76, Johann Spring 2010 Cal Poly, Team 29-76, Johann Spring 2010 的会员
CPSU-JOHANN-S10S29G76
4 名成员
创作了35篇指南
