简介

How to open up the IBM ThinkPad 560z

  1. Slide the battery release latch to the right.
    • Slide the battery release latch to the right.

    • Pull out the battery out towards the front of the device.

    添加评论

  2. Remove the 7 mm Phillips #0 screws.
    • Remove the 7 mm Phillips #0 screws.

    • Remove the 10 mm Phillips #0 screws.

    • Remove the 14 mm Phillips #0 screw.

    添加评论

    • Open the flap on the left hand side.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Insert the plastic opening tools between the right and left sides of the latch.

    • Pry the right side of the latch, and then pry the left side to detach the laptop's cover.

    添加评论

    • Open the flap on the right side.

    添加评论

    • Insert the plastic opening tools towards the right side of the latch.

    • Gently pry the right side out to release the top cover.

    添加评论

    • Lift the keyboard slowly.

    • A cable connects the keyboard to the motherboard. If you are not careful, you will damage the cable.

    添加评论

    • Use your fingers or a spudger to detach the connector.

    添加评论

    • Carefully lift and remove the keyboard.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Derek Driscoll

于2010年04月15日注册

119 信誉积分

创作了8篇指南

团队

Cal Poly, Team 26-27, Regan Spring 2010 Cal Poly, Team 26-27, Regan Spring 2010 的会员

CPSU-REGAN-S10S26G27

3 名成员

创作了18篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 6

过去的30天: 9

总计 1,423