修复你的物品 社区 商店

Disassembling HTC Touch Pro CDMA Verizon Basic Parts

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独食用。

简介

This guide is meant to serve as a prerequisite for many of the more in depth repair guides.

你所需要的

  1. Disassembling HTC Touch Pro CDMA Verizon Basic Parts, Battery: 步骤 1 中的图像 1，1

    • Remove the back cover (not pictured) to your phone.

    编辑

  2. Disassembling HTC Touch Pro CDMA Verizon Basic Parts: 步骤 2 中的图像 1，2 Disassembling HTC Touch Pro CDMA Verizon Basic Parts: 步骤 2 中的图像 2，2

    • To remove the battery, place your thumb beneath the tab and begin to lift.

    • Pinching the battery, lift up at an angle from the bottom of the phone.

    编辑

  3. Disassembling HTC Touch Pro CDMA Verizon Basic Parts, Basic Parts: 步骤 3 中的图像 1，1

    • Place the battery in a container off to the side. If you do this for every step beyond this point, you will keep better track of your parts and make reassembling the device far easier when you get around to it.

    • It might not be necessary, but we recommend using an anti-static bracelet or anti-static mat from this point on. Any charge on your finger tips may cause harm to the device.

    编辑

  5. Disassembling HTC Touch Pro CDMA Verizon Basic Parts: 步骤 4 中的图像 1，3 Disassembling HTC Touch Pro CDMA Verizon Basic Parts: 步骤 4 中的图像 2，3 Disassembling HTC Touch Pro CDMA Verizon Basic Parts: 步骤 4 中的图像 3，3

    • Use a T6 screwdriver to remove the four screws on the rear plate of the HTC Touch Pro.

    • Place your screws in a bag labeled with where they came from, what screwdriver you used, and the order in which you removed them. For example, this bag would say "Rear casing. T6. #1."

    编辑

  6. Disassembling HTC Touch Pro CDMA Verizon Basic Parts: 步骤 5 中的图像 1，3 Disassembling HTC Touch Pro CDMA Verizon Basic Parts: 步骤 5 中的图像 2，3 Disassembling HTC Touch Pro CDMA Verizon Basic Parts: 步骤 5 中的图像 3，3

    • Next, remove the casing that covers the camera and motherboard.

    • To do this, place your thumbnail in any of the grooves along either side and pry it open.

    编辑

  7. Disassembling HTC Touch Pro CDMA Verizon Basic Parts: 步骤 6 中的图像 1，2 Disassembling HTC Touch Pro CDMA Verizon Basic Parts: 步骤 6 中的图像 2，2

    • Insert your spudger along the slit between the keyboard and the external casing. Pry open as shown.

    • Careful! The ribbon connecting the keyboard to the motherboard will still connect the two halves of the phone when you separate them. Be sure to take your time and move slowly to avoid damage to the cable.

    编辑

  8. Disassembling HTC Touch Pro CDMA Verizon Basic Parts: 步骤 7 中的图像 1，3 Disassembling HTC Touch Pro CDMA Verizon Basic Parts: 步骤 7 中的图像 2，3 Disassembling HTC Touch Pro CDMA Verizon Basic Parts: 步骤 7 中的图像 3，3

    • Remove the keyboard ribbon from the motherboard. To do this, simply grasp the ribbon at its base and pry it up at an angle. The ribbon has a metal end that is easily removed from the motherboard.

    编辑

  9. Disassembling HTC Touch Pro CDMA Verizon Basic Parts: 步骤 8 中的图像 1，3 Disassembling HTC Touch Pro CDMA Verizon Basic Parts: 步骤 8 中的图像 2，3 Disassembling HTC Touch Pro CDMA Verizon Basic Parts: 步骤 8 中的图像 3，3

    • Using a Phillips Head size 0 screwdriver, remove the 3 screws holding in the battery compartment.

    • Remove the ribbon covering the battery compartment by pinching it at the base and lifting.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与8其他贡献者

Jack Bowen

于04/09/11注册

79 声望

创作了5篇指南

徽章: 7

+ 4更多徽章

团队

Cal Poly, Team 20-67, Walters Spring 2011 Cal Poly, Team 20-67, Walters Spring 2011 的会员

CPSU-WALTERS-S11S20G67

4 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 1,591