Disassembling General Electric Telephone 2-9710A Handset - iFixit 维修指南

本指南有最近更改，您可查看未经巡查的最新版本。

简介

Use this guide to remove the shell of the handset

你所需要的

步骤 1 Phone Cord

Disassembling General Electric Telephone 2-9710A Handset, Phone Cord: 步骤 1 中的图像 1，2

Disassembling General Electric Telephone 2-9710A Handset, Phone Cord: 步骤 1 中的图像 2，2

Unplug the device before proceeding.
Using a plastic opening tool, remove the phone cord from the phone jack at the base of the headset.
To release the cable, gently press down on the top plastic tab of the connector.

步骤 2

Disassembling General Electric Telephone 2-9710A Handset: 步骤 2 中的图像 1，3

Disassembling General Electric Telephone 2-9710A Handset: 步骤 2 中的图像 2，3

Disassembling General Electric Telephone 2-9710A Handset: 步骤 2 中的图像 3，3

Remove the 7.5 mm screw.
Remove the screw cap.
Pull up the phone cord to remove it from the base.

步骤 3 Disassembling General Electric Telephone 2-9710A Handset

Disassembling General Electric Telephone 2-9710A Handset, Disassembling General Electric Telephone 2-9710A Handset: 步骤 3 中的图像 1，2

Disassembling General Electric Telephone 2-9710A Handset, Disassembling General Electric Telephone 2-9710A Handset: 步骤 3 中的图像 2，2

Remove the plastic cover with a Plastic Opening Tool by gently sliding the tool underneath the plastic and pry the cover off.

步骤 4

Disassembling General Electric Telephone 2-9710A Handset: 步骤 4 中的图像 1，1

Remove the paper with a Plastic Opening Tool by gently sliding the tool underneath and prying the paper away from the phone.

步骤 5

Disassembling General Electric Telephone 2-9710A Handset: 步骤 5 中的图像 1，2

Disassembling General Electric Telephone 2-9710A Handset: 步骤 5 中的图像 2，2

Remove the rubber stopper with a Plastic Opening Tool by gently sliding the tool underneath and pry away from the phone.

步骤 6

Disassembling General Electric Telephone 2-9710A Handset: 步骤 6 中的图像 1，2

Disassembling General Electric Telephone 2-9710A Handset: 步骤 6 中的图像 2，2

Remove the two screws.
Remove the 2 21mm screws by using a Philips #1 screwdriver.

步骤 7

Disassembling General Electric Telephone 2-9710A Handset: 步骤 7 中的图像 1，1

Pull apart the handset by pulling the shell away from the other half of the phone.

步骤 8

Disassembling General Electric Telephone 2-9710A Handset: 步骤 8 中的图像 1，2

Disassembling General Electric Telephone 2-9710A Handset: 步骤 8 中的图像 2，2

Remove 3 screws attaching the logic board to shell.
Remove the 13mm screw with a Philips #1 screwdriver.
Remove the 2 13mm screws with washers with a Philips #1 screwdriver.

步骤 9

Disassembling General Electric Telephone 2-9710A Handset: 步骤 9 中的图像 1，2

Disassembling General Electric Telephone 2-9710A Handset: 步骤 9 中的图像 2，2

Slide out the phone jack from the shell by gently lifting up the phone jack.

步骤 10

Disassembling General Electric Telephone 2-9710A Handset: 步骤 10 中的图像 1，1

Without removing the logic board completely, pivot the logic board out of shell.

结论

To reassemble your device, follow these instructions in reverse order.

作者

与12其他贡献者

Alles Rebel

于09/20/12注册

72 声望

创作了3篇指南

+ 5更多徽章

团队

Cal Poly, Team 16-59, Forte Fall 2012 Cal Poly, Team 16-59, Forte Fall 2012 的会员

CPSU-FORTE-F12S16G59

4 名成员

创作了17篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 4

过去 30 天： 22

总计 2,698