跳转到主内容

简介

This guide will explain how to remove the outer case of the General Electric Bagel Switch 4-Slice Toaster.

配件

没有特定配件。

  1. Unplug the toaster from the electrical outlet.
    • Unplug the toaster from the electrical outlet.

  2. Remove the two levers and four dials by pulling them out directly towards you. Removing these components may require some force, but they will release.
    • Remove the two levers and four dials by pulling them out directly towards you.

    • Removing these components may require some force, but they will release.

  3. Look for the plastic clips on the back side of the toaster.
    • Look for the plastic clips on the back side of the toaster.

    • Disconnect the small plastic clips on the back of the toaster. Use Philips head Screwdriver to do this step.

    • Now, carefully remove the toaster casing.

结论

To reassemble your device, follow these instructions in reverse order.

Ron Gajdos

于2013年10月16日注册

307 信誉积分

创作了3篇指南

团队

UMass Dartmouth, Team 4-4, Vijaybhaskar Fall 2013 UMass Dartmouth, Team 4-4, Vijaybhaskar Fall 2013 的会员

UMASSD-VIJAYBHASKAR-F13S4G4

3 名成员

创作了4篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 13

总计 616