/
我的工作台

快速访问设备的指南、配件和论坛

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
注册
登录
加入世界上最大的维修社区
Disassembling GD Midea FT30-3D AC Power Cord

Disassembling GD Midea FT30-3D AC Power Cord

Chris Hartley

Chris Hartley 和 2 其他贡献者

最后更新于 January 28, 2014

5 - 10 分钟
简单
动态照片拍摄
更好的介绍

你所需要的

配件

工具

查看更多...

  1. Disassembling GD Midea FT30-3D AC Power Cord, Bottom Base: 步骤 1 中的图像 1，1

    • Locate and remove the 14.5 mm Phillips #1 screw on the bottom of the fan base.

    编辑

  2. Disassembling GD Midea FT30-3D AC Power Cord: 步骤 2 中的图像 1，2 Disassembling GD Midea FT30-3D AC Power Cord: 步骤 2 中的图像 2，2

    • Locate the gray base support release tabs found on either side pictured in the first image.

    • There are release tabs on each side of the base.

    • Press both release tabs in with the tip of your fingers and pull the gray base support until the tabs are cleared.

    编辑

  3. Disassembling GD Midea FT30-3D AC Power Cord: 步骤 3 中的图像 1，1

    • Continue removing the gray base support by pressing your thumb into the circular opening in the base and pulling with your figures on the back side.

    • Notice that on the internal front tip of the base there is a tab. Because of this tab the back end will pivot off at that point.

    编辑

  5. Disassembling GD Midea FT30-3D AC Power Cord: 步骤 4 中的图像 1，1

    • After the base has separated more it will be easy to fully remove it. Continue pulling the back edge of the gray base support, rotating it around the front tab until it comes off completely.

    编辑

  6. Disassembling GD Midea FT30-3D AC Power Cord: 步骤 5 中的图像 1，1

    • Remove the following five 14.5 mm Phillips #1 screws found on the bottom.

    • All of the screws are recessed by 17.5 mm, so ensure your screwdriver can reach that far.

    编辑

  7. Disassembling GD Midea FT30-3D AC Power Cord: 步骤 6 中的图像 1，1

    • Once all five screws have been removed the base cover should fall right off with out any effort.

    • When putting the base cover back on; be careful to make sure that none of the wires are pinched.

    编辑

  8. Disassembling GD Midea FT30-3D AC Power Cord, AC Power Cord: 步骤 7 中的图像 1，1

    • Remove the two 15 mm Phillips screws on the retention plate.

    • The tan retention plate will fall off once the screws are removed.

    编辑

  9. Disassembling GD Midea FT30-3D AC Power Cord: 步骤 8 中的图像 1，1

    • Take the 1.5 mm Flathead Screwdriver, or any thin elongated tool that fits into the semi-circular holes along side the AC power cord white wire. Press into the hole gently to release the grip on the wire.

    • The AC power cord wire should release with ease if done properly.

    编辑

  10. Disassembling GD Midea FT30-3D AC Power Cord: 步骤 9 中的图像 1，1

    • Cut the existing cable tie bundling the other AC power cord, red, orange, gray, and blue wires together.

    • Remove or cut the crimp connector connecting the blue wire and the AC power cord wire.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与2其他贡献者

Chris Hartley

于10/04/12注册

438 声望

创作了3篇指南

徽章: 11

+ 8更多徽章

团队

Cal Poly, Team 24-28, Regan Fall 2012 Cal Poly, Team 24-28, Regan Fall 2012 的会员

CPSU-REGAN-F12S24G28

4 名成员

创作了14篇指南

0指南评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 5

总计 693