修复你的物品 社区 商店

Disassembling Fujifilm Endeavor 100ix Outer Casing

简介

This guide will instruct camera owners how to take off the outer casing and how to access the inside components to repair and/or replace broken parts.

你所需要的

  1. Disassembling Fujifilm Endeavor 100ix Outer Casing, Outer Casing: 步骤 1 中的图像 1，1

    • Locate and remove two 6.4mm screws on the bottom of the camera with a Phillips #00 screwdriver.

    翻译

  2. Disassembling Fujifilm Endeavor 100ix Outer Casing: 步骤 2 中的图像 1，1

    • Locate the battery door.

    翻译

  3. Disassembling Fujifilm Endeavor 100ix Outer Casing: 步骤 3 中的图像 1，1

    • Locate the latch on the battery door marked by the word "BATT." Use your finger to pry it open.

    翻译

  4. Disassembling Fujifilm Endeavor 100ix Outer Casing: 步骤 4 中的图像 1，1

    • Remove the battery from the camera by pulling the battery door outwards.

    翻译

  6. Disassembling Fujifilm Endeavor 100ix Outer Casing: 步骤 5 中的图像 1，1

    • Locate and remove three black 3.80mm screws on the back of the camera with the Phillips #00 screwdriver.

    翻译

  7. Disassembling Fujifilm Endeavor 100ix Outer Casing: 步骤 6 中的图像 1，2 Disassembling Fujifilm Endeavor 100ix Outer Casing: 步骤 6 中的图像 2，2

    • Locate and remove the 6.4mm screws located on either side of the camera with a Phillips #00 screwdriver.

    翻译

  8. Disassembling Fujifilm Endeavor 100ix Outer Casing: 步骤 7 中的图像 1，1

    • Locate the film door latch located on the side of the camera.

    • Insert the spudger under the latch.

    • Caution: Be careful during the following step in order to not break any parts within the camera. Prying the latch in any other direction than perpendicular may result in broken parts.

    • Pry the latch upward, applying force perpendicular to the camera.

    翻译

  9. Disassembling Fujifilm Endeavor 100ix Outer Casing: 步骤 8 中的图像 1，1

    • Insert the flat edge of the spudger between the gold front casing and the black back casing.

    • Pry the spudger upward until the black back casing snaps out and is dislodged on that edge of the camera.

    翻译

  10. Disassembling Fujifilm Endeavor 100ix Outer Casing: 步骤 9 中的图像 1，1

    • Squeeze the camera by placing a thumb on the tab marked CE.

    • Pull the back half of the camera firmly away from the camera body.

    翻译

  11. Disassembling Fujifilm Endeavor 100ix Outer Casing: 步骤 10 中的图像 1，1

    • Locate and remove the 3.80mm screw inside the film compartment with the Phillips #00 screwdriver.

    翻译

  12. Disassembling Fujifilm Endeavor 100ix Outer Casing: 步骤 11 中的图像 1，2 Disassembling Fujifilm Endeavor 100ix Outer Casing: 步骤 11 中的图像 2，2

    • Pull the front cover off of the camera by lifting the tripod tab over the tripod hole.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与5其他贡献者

Eric Nicolai

于01/10/11注册

679 声望

创作了6篇指南

徽章: 10

+ 7更多徽章

团队

Cal Poly, Team 13-5, Forte Winter 2011 Cal Poly, Team 13-5, Forte Winter 2011 的会员

CPSU-FORTE-W11S13G5

5 名成员

创作了11篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 1,329