跳转到主内容

本指南有最近更改,您可查看未经巡查的最新版本

Disassembling Compaq Mini 110 Heat Sink

你所需要的

  1. Disassembling Compaq Mini 110 Heat Sink, Battery: 步骤 1 中的图像 1,2 Disassembling Compaq Mini 110 Heat Sink, Battery: 步骤 1 中的图像 2,2
    • Locate the battery and the battery tabs on the bottom of the Compaq Mini.

  2. Disassembling Compaq Mini 110 Heat Sink: 步骤 2 中的图像 1,3 Disassembling Compaq Mini 110 Heat Sink: 步骤 2 中的图像 2,3 Disassembling Compaq Mini 110 Heat Sink: 步骤 2 中的图像 3,3
    • Push both tabs inward simultaneously and slide the battery out.

  3. Disassembling Compaq Mini 110 Heat Sink, RAM: 步骤 3 中的图像 1,2 Disassembling Compaq Mini 110 Heat Sink, RAM: 步骤 3 中的图像 2,2
    • Use a Philips #0 screwdriver to unscrew the two screws covering the memory compartment on the bottom of the laptop and remove the cover.

  4. Disassembling Compaq Mini 110 Heat Sink: 步骤 4 中的图像 1,1
    • Push out the side tabs simultaneously and pull out the old RAM module.

    • When inserting a new RAM stick, be sure to evenly insert the gold pins in the same orientation that the old module was removed. While sliding the module in, press the side tabs in place.

  5. Disassembling Compaq Mini 110 Heat Sink, Keyboard: 步骤 5 中的图像 1,2 Disassembling Compaq Mini 110 Heat Sink, Keyboard: 步骤 5 中的图像 2,2
    • Remove the rubber pads located on the corners of your Compaq Mini.

    • There may be junk underneath it. This is residue left from the glue that held on the rubber pad. Just scrape it away to find the screw.

  6. Disassembling Compaq Mini 110 Heat Sink: 步骤 6 中的图像 1,2 Disassembling Compaq Mini 110 Heat Sink: 步骤 6 中的图像 2,2
    • Unscrew all the corner screws. There are four total, one under each rubber pad.

  7. Disassembling Compaq Mini 110 Heat Sink: 步骤 7 中的图像 1,2 Disassembling Compaq Mini 110 Heat Sink: 步骤 7 中的图像 2,2
    • Unscrew the screw for the bottom case located in the RAM compartment.

  8. Disassembling Compaq Mini 110 Heat Sink: 步骤 8 中的图像 1,2 Disassembling Compaq Mini 110 Heat Sink: 步骤 8 中的图像 2,2
    • Remove the three screws in the silver tabs at the back of the keyboard.

    • These are located at the back of the base under the screen.

    • Lift the keyboard away from the laptop.

  9. Disassembling Compaq Mini 110 Heat Sink, Hard Drive: 步骤 9 中的图像 1,1
    • Remove the three screws holding the panel in place.

  10. Disassembling Compaq Mini 110 Heat Sink: 步骤 10 中的图像 1,2 Disassembling Compaq Mini 110 Heat Sink: 步骤 10 中的图像 2,2
    • Pull up on the tab to remove the hard drive.

  11. Disassembling Compaq Mini 110 Heat Sink, Top Cover: 步骤 11 中的图像 1,1
    • Remove the eight screws that are from the plastic top cover.

  12. Disassembling Compaq Mini 110 Heat Sink: 步骤 12 中的图像 1,3 Disassembling Compaq Mini 110 Heat Sink: 步骤 12 中的图像 2,3 Disassembling Compaq Mini 110 Heat Sink: 步骤 12 中的图像 3,3
    • Pry up the top plastic cover using a spudger.

    • These two tabs under the screen need to be pushed in with a spudger.

  13. Disassembling Compaq Mini 110 Heat Sink: 步骤 13 中的图像 1,2 Disassembling Compaq Mini 110 Heat Sink: 步骤 13 中的图像 2,2
    • Remove the cable by carefully pulling it up.

    • Be careful when lifting up the cover because the track pad is still attached.

  14. Disassembling Compaq Mini 110 Heat Sink, Heat Sink: 步骤 14 中的图像 1,2 Disassembling Compaq Mini 110 Heat Sink, Heat Sink: 步骤 14 中的图像 2,2
    • Remove all four screws.

    • The underside has lubricant to help the heat sink do its job. Be careful not to smear it all over the place.

结论

To reassemble your device, follow these instructions in reverse order.

alea

于10/06/10注册

1,405 声望

创作了14篇指南

团队

Cal Poly, Team 22-2, Maness Fall 2010 Cal Poly, Team 22-2, Maness Fall 2010 的会员

CPSU-MANESS-F10S22G2

6 名成员

创作了20篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 1

总计 4,031