修复你的物品 社区 商店

本指南有最近更改，您可查看未经巡查的最新版本。

Disassembling Canon PowerShot SD850 IS Case Removal

简介

How to remove the outer casing of your Canon PowerShot SD850 IS.

你所需要的

  1. Disassembling Canon PowerShot SD850 IS Case Removal, Battery: 步骤 1 中的图像 1，3 Disassembling Canon PowerShot SD850 IS Case Removal, Battery: 步骤 1 中的图像 2，3 Disassembling Canon PowerShot SD850 IS Case Removal, Battery: 步骤 1 中的图像 3，3

    • Slide the light grey tab toward the edge of the camera using your fingernail.

    • Pull the light grey tab up to open the door.

    • These photos do not show the camera’s memory card or battery, which should be visible inside.

    翻译

  2. Disassembling Canon PowerShot SD850 IS Case Removal: 步骤 2 中的图像 1，2 Disassembling Canon PowerShot SD850 IS Case Removal: 步骤 2 中的图像 2，2

    • Slide the small brown tab toward the edge of the camera using your fingernail.

    • Let go of the brown tab when the battery pops up.

    • Grab battery and pull straight up to remove from holder.

    • When inserting the battery, orient it so that the terminals connect.

    翻译

  3. Disassembling Canon PowerShot SD850 IS Case Removal, Case: 步骤 3 中的图像 1，2 Disassembling Canon PowerShot SD850 IS Case Removal, Case: 步骤 3 中的图像 2，2

    • Remove the following 4 screws:

    • Two 2.8 mm Phillips #00 at the bottom of the camera.

    • Two 2.75 mm Phillips #00 on the opposite side of the wrist strap.

    翻译

  5. Disassembling Canon PowerShot SD850 IS Case Removal: 步骤 4 中的图像 1，3 Disassembling Canon PowerShot SD850 IS Case Removal: 步骤 4 中的图像 2，3 Disassembling Canon PowerShot SD850 IS Case Removal: 步骤 4 中的图像 3，3

    • Open the A/V OUT DIGITAL flap on the side of the wrist strap.

    • Remove the 2.75 mm Phillips #00 under the A/V OUT DIGITAL flap on the side of the wrist strap.

    翻译

  6. Disassembling Canon PowerShot SD850 IS Case Removal: 步骤 5 中的图像 1，2 Disassembling Canon PowerShot SD850 IS Case Removal: 步骤 5 中的图像 2，2

    • On the bottom of the camera, use your fingernail to slide the light gray tab towards the edge of the camera.

    • Slide light gray door and pull up to open the door.

    • Remove the 8.35 mm Phillips #00 next to the brown tab that holds the battery.

    翻译

  7. Disassembling Canon PowerShot SD850 IS Case Removal: 步骤 6 中的图像 1，2 Disassembling Canon PowerShot SD850 IS Case Removal: 步骤 6 中的图像 2，2

    • Gently pull the front cover straight out from the camera. This will expose the wiring on the front of the camera.

    翻译

  8. Disassembling Canon PowerShot SD850 IS Case Removal: 步骤 7 中的图像 1，1

    • Remove the 2.75 mm Phillips #00 next to A/V OUT DIGITAL.

    翻译

  9. Disassembling Canon PowerShot SD850 IS Case Removal: 步骤 8 中的图像 1，1

    • Slide the back casing (with the screen protector) off to reveal the LCD and back wiring.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

作者

与5其他贡献者

Peter Tran

于10/06/10注册

225 声望

创作了6篇指南

徽章: 12

+ 9更多徽章

团队

Cal Poly, Team 20-7, Maness Fall 2010 Cal Poly, Team 20-7, Maness Fall 2010 的会员

CPSU-MANESS-F10S20G7

6 名成员

创作了7篇指南

一条评论

Had to exchange a battery/SD card cover on an Ixus970IS. This guide very helpful showing the way due to similar layout of the Ixus and the PS850IS! Thanx a lot! :-)

KBK Copenhagen DK

Keld Baden-Kristensen - 回复

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 1

过去 30 天： 9

总计 4,212