简介

Removing the back cover allows access to the LCD display and the flash assembly.

配件

无需配件。

  1. Remove one 2.25mm screw on the bottom.
    • Remove one 2.25mm screw on the bottom.

  2. Remove two 2.25mm screws on the right side looking from the front.
    • Remove two 2.25mm screws on the right side looking from the front.

  3. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  4. Remove one 4.7mm screw on the side with the AV output.
    • Remove one 4.7mm screw on the side with the AV output.

  5. Pull off the back cover.
    • Pull off the back cover.

    • The back cover tends to stick in the top corner (near the mode dial) due to a metal clip. Jiggle the cover side to side as you pull it out.

结论

To reassemble your device, follow these instructions in reverse order.

Jeremy Rabaino

于2010年10月10日注册

135 信誉积分

创作了6篇指南

团队

Cal Poly, Team 20-9, Maness Fall 2010 Cal Poly, Team 20-9, Maness Fall 2010 的会员

CPSU-MANESS-F10S20G9

5 名成员

创作了6篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 3

总计 2,442