跳转到主内容

简介

Use this guide to remove the LCD screen.

配件

没有特定配件。

  1. Remove wrist strap and battery. Remove wrist strap and battery.
    • Remove wrist strap and battery.

  2. Remove 2 screws from each side of the camera (4 total, 0.102 in). Remove 2 screws from the bottom on the camera (0.138 in). Do not mix the 4 side screws with the 2 bottoms ones; they are different sizes.
    • Remove 2 screws from each side of the camera (4 total, 0.102 in).

    • Remove 2 screws from the bottom on the camera (0.138 in).

    • Do not mix the 4 side screws with the 2 bottoms ones; they are different sizes.

  3. Gently pull off the front cover. The plate on the side should come off. Gently pull off the back cover.
    • Gently pull off the front cover.

    • The plate on the side should come off.

    • Gently pull off the back cover.

  4. The cases should now be removed.
    • The cases should now be removed.

  5. Macbook 电池维修套装

    起价 $69.99

    Buy Now

    Macbook 电池维修套装

    起价 $69.99

    Buy Now
  6. Remove the top-left screw above the LCD screen (0.100 in). Remove the C-shaped plate from the side of the LCD screen.
    • Remove the top-left screw above the LCD screen (0.100 in).

    • Remove the C-shaped plate from the side of the LCD screen.

  7. Remove the screw from the top-right of the LCD screen (0.098 in). Remove the L-shaped bar from the right of the LCD screen.
    • Remove the screw from the top-right of the LCD screen (0.098 in).

    • Remove the L-shaped bar from the right of the LCD screen.

  8. Use the spudger to remove the L-shaped bar from the left-side of the LCD screen. Use the spudger to remove the L-shaped bar from the left-side of the LCD screen.
    • Use the spudger to remove the L-shaped bar from the left-side of the LCD screen.

  9. Use tweezers to remove the connector ribbon from the top-left corner above the LCD screen.
    • Use tweezers to remove the connector ribbon from the top-left corner above the LCD screen.

    • Be gentle. This ribbon should stay attached to the screen.

  10. Use a spudger to lift the connector lock (black flap) at the end of the larger LCD connector ribbon on the front side of the camera. Use the tweezers to lift this ribbon. Use the tweezers to gently peel this ribbon from the one underneath it.
    • Use a spudger to lift the connector lock (black flap) at the end of the larger LCD connector ribbon on the front side of the camera.

    • Use the tweezers to lift this ribbon.

    • Use the tweezers to gently peel this ribbon from the one underneath it.

  11. The LCD screen should now be removed.
    • The LCD screen should now be removed.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Tyler Grossheim

于2011年01月25日注册

1,386 信誉积分

创作了6篇指南

团队

Cal Poly, Team 3-32, Regan Winter 2011 Cal Poly, Team 3-32, Regan Winter 2011 的会员

CPSU-REGAN-W11S3G32

3 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 3,304