修复你的物品 社区 商店

本指南有最近更改，您可查看未经巡查的最新版本。

Disassembling Canon PowerShot S50 Outer Casing

简介

Use this guide to remove the back panel of the camera.

你所需要的

  1. Disassembling Canon PowerShot S50 Outer Casing, Battery: 步骤 1 中的图像 1，2 Disassembling Canon PowerShot S50 Outer Casing, Battery: 步骤 1 中的图像 2，2

    • Place camera LCD side up and press up on the battery door.

    • Let it swing open until you can see the battery inside.

    翻译

  2. Disassembling Canon PowerShot S50 Outer Casing: 步骤 2 中的图像 1，1

    • Press down on the orange plastic.

    • This will gently eject the battery from its compartment.

    翻译

  3. Disassembling Canon PowerShot S50 Outer Casing: 步骤 3 中的图像 1，2 Disassembling Canon PowerShot S50 Outer Casing: 步骤 3 中的图像 2，2

    • Holding the edges, slide out the battery.

    翻译

  4. Disassembling Canon PowerShot S50 Outer Casing, Front Panel/Battery Door: 步骤 4 中的图像 1，1

    • Look at the camera from the side with the lanyard and 4 screws.

    • Remove the two 3.4 mm screws on the metallic colored part.

    翻译

  5. Disassembling Canon PowerShot S50 Outer Casing: 步骤 5 中的图像 1，1

    • Remove the 3mm screw on the top left.

    • NOTE: When reassembling, it is helpful to put the top screw back in before placing the front cover back on the camera.

    • Now remove the 5.3mm screw on the bottom.

    翻译

  7. Disassembling Canon PowerShot S50 Outer Casing: 步骤 6 中的图像 1，1

    • Place the camera LCD side down.

    • Remove the two 5.3mm screws by the battery door.

    翻译

  8. Disassembling Canon PowerShot S50 Outer Casing: 步骤 7 中的图像 1，1

    • Remove the four 3.4mm screws on the bottom of the camera around the tripod mount.

    • Make sure to keep these screws separate from the previous 5.3 mm screws.

    翻译

  9. Disassembling Canon PowerShot S50 Outer Casing: 步骤 8 中的图像 1，1

    • Stand the camera back up.

    • Remove the two 3.6mm screws on the side with the A/V Out port.

    翻译

  10. Disassembling Canon PowerShot S50 Outer Casing: 步骤 9 中的图像 1，1

    • Lift open the rubber flap covering the A/V Out port.

    • Remove the 3.4mm screw in the center.

    • During reassembly, put the A/V out rubber door on before replacing the front panel of the camera

    翻译

  11. Disassembling Canon PowerShot S50 Outer Casing: 步骤 10 中的图像 1，1

    • Use a spudger and gently open up the front panel of the camera.

    • A thin plastic ribbon will stay connected by a brown piece to front panel of the camera.

    翻译

  12. Disassembling Canon PowerShot S50 Outer Casing: 步骤 11 中的图像 1，1

    • There will be a brown plastic piece keeping the thin plastic ribbon in place.

    • Use the spudger to pull out the brown plastic piece attached to the orange plastic.

    翻译

  13. Disassembling Canon PowerShot S50 Outer Casing: 步骤 12 中的图像 1，1

    • Use a pair of tweezers and remove the metal piece inside the camera.

    翻译

  14. Disassembling Canon PowerShot S50 Outer Casing: 步骤 13 中的图像 1，1

    • Remove the battery door

    • NOTE: Putting this back on requires aligning the spring on the back of the door with the hole on the camera

    翻译

  15. Disassembling Canon PowerShot S50 Outer Casing, Outer Casing: 步骤 14 中的图像 1，1

    • Using a spudger, gently separate the back panel from the rest of the camera and remove it.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Karim

于04/12/12注册

24 声望

创作了3篇指南

徽章: 8

+ 5更多徽章

团队

Cal Poly, Team 7-34, Maness Spring 2012 Cal Poly, Team 7-34, Maness Spring 2012 的会员

CPSU-MANESS-S12S7G34

5 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 4

过去 30 天： 18

总计 1,623