当前版本的文档还未经巡查,您可以查看最新的已查核版本。
这个步骤还没有翻译 帮忙翻译一下
Remove the two 7.9 mm screws using a Phillips #1 screwdriver.
Lift up the back cover to remove it.
You may need to lift firmly as it requires quite a bit of force.
Open the front tray.
Open the scanner compartment.
Make sure the blue lever locks into place to keep the compartment open.
Remove the blue lever from its slot by pushing it back and twisting clockwise.
Close the scanner compartment and cover.
Pry open the side cover with the plastic opening tool.
Flip the printer over so that the bottom of the printer is facing you.
Use the plastic opening tool to remove the corner of the side panel from the plastic pin.
Use the plastic opening tool to loosen the side panel from the bottom of the printer.
取消:我没有完成这个指南。
6等其他人完成本指南。
与10其他贡献者
于01/17/13注册
116 声望
撰写一个指南
徽章: 11
+ 8更多徽章
CPSU-REGAN-W13S19G41
4 名成员
创作了6篇指南
Good job!!!!
lhitvietnam - 2016年7月27日 回复
Where is the rest of disassembly?
bill roberts - 2021年11月27日 回复
选择一个尺寸并复制下面的代码,将本指南作为一个小插件嵌入到你的网站/论坛中。
过去 24 小时: 0
过去 7 天: 0
过去 30 天: 23
总计 21,143