Disassembling Canon Pixma MP480 Rear and Side Panel

步骤 1 Rear and Side Panel

Disassembling Canon Pixma MP480 Rear and Side Panel, Rear and Side Panel: 步骤 1 中的图像 1，2

Disassembling Canon Pixma MP480 Rear and Side Panel, Rear and Side Panel: 步骤 1 中的图像 2，2

Remove the two 7.9 mm screws using a Phillips #1 screwdriver.

编辑

步骤 2

Disassembling Canon Pixma MP480 Rear and Side Panel: 步骤 2 中的图像 1，1

Lift up the back cover to remove it.
You may need to lift firmly as it requires quite a bit of force.

编辑

步骤 3

Disassembling Canon Pixma MP480 Rear and Side Panel: 步骤 3 中的图像 1，1

Open the front tray.

编辑

步骤 4

Disassembling Canon Pixma MP480 Rear and Side Panel: 步骤 4 中的图像 1，2

Disassembling Canon Pixma MP480 Rear and Side Panel: 步骤 4 中的图像 2，2

Open the scanner compartment.
Make sure the blue lever locks into place to keep the compartment open.

编辑

步骤 5

Disassembling Canon Pixma MP480 Rear and Side Panel: 步骤 5 中的图像 1，2

Disassembling Canon Pixma MP480 Rear and Side Panel: 步骤 5 中的图像 2，2

Remove the blue lever from its slot by pushing it back and twisting clockwise.
Close the scanner compartment and cover.

编辑

步骤 6

Disassembling Canon Pixma MP480 Rear and Side Panel: 步骤 6 中的图像 1，2

Disassembling Canon Pixma MP480 Rear and Side Panel: 步骤 6 中的图像 2，2

Pry open the side cover with the plastic opening tool.

编辑

步骤 7

Disassembling Canon Pixma MP480 Rear and Side Panel: 步骤 7 中的图像 1，2

Disassembling Canon Pixma MP480 Rear and Side Panel: 步骤 7 中的图像 2，2

Flip the printer over so that the bottom of the printer is facing you.
Use the plastic opening tool to remove the corner of the side panel from the plastic pin.

编辑

步骤 8

Disassembling Canon Pixma MP480 Rear and Side Panel: 步骤 8 中的图像 1，2

Disassembling Canon Pixma MP480 Rear and Side Panel: 步骤 8 中的图像 2，2

Use the plastic opening tool to loosen the side panel from the bottom of the printer.