跳转到主内容

Disassembling Canon EOS Rebel XS Top Panel

你所需要的

  1. Disassembling Canon EOS Rebel XS Top Panel, Latch Side Cover: 步骤 1 中的图像 1,1
    • Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.

  2. Disassembling Canon EOS Rebel XS Top Panel: 步骤 2 中的图像 1,1
    • On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.

    • Pry up the panel; starting from the front/bottom corner, as indicated.

    • There's a concealed lip, under the opposite edge.

  3. Disassembling Canon EOS Rebel XS Top Panel, Disassembling Canon EOS Rebel XS Front Cover: 步骤 3 中的图像 1,1
    • Remove three medium length screws from the bottom of the camera

  4. Disassembling Canon EOS Rebel XS Top Panel: 步骤 4 中的图像 1,1
    • Remove the two medium length screws on the front panel of the camera above the lens mount.

    • Once you done, you may use the Spudger to panel from non-grip side.

    • If you start on the grip side, it will be more challenging to loosen the panel.

  5. Disassembling Canon EOS Rebel XS Top Panel, Back Cover: 步骤 5 中的图像 1,1
    • Remove the three long black screws from the bottom using a #00 Phillips screwdriver.

    • Use tweezers to lift the panel.

  6. Disassembling Canon EOS Rebel XS Top Panel: 步骤 6 中的图像 1,1
    • Once you have detached the back cover, use a pair of tweezers to lightly pull on strap found connecting the back cover to the camera.

  7. Disassembling Canon EOS Rebel XS Top Panel, Top Panel: 步骤 7 中的图像 1,1
    • Remove the following ribbons with the tweezers by gently pulling on them.

    • Remove the three black screws, near the eye piece, using the Phillips Screwdriver.

  8. Disassembling Canon EOS Rebel XS Top Panel: 步骤 8 中的图像 1,1
    • Remove the cable heads attached on the front side of the camera next to the lens mount.

    • Be gentle when puling wires lose, use the tweezers to remove the wires.

  9. Disassembling Canon EOS Rebel XS Top Panel: 步骤 9 中的图像 1,1
    • You can use your fingers to pull the top panel of the camera.

结论

To reassemble your device, follow these instructions in reverse order.

Daniel Bussone

于01/28/11注册

1,251 声望

创作了11篇指南

团队

Cal Poly, Team 3-41, Regan Winter 2011 Cal Poly, Team 3-41, Regan Winter 2011 的会员

CPSU-REGAN-W11S3G41

2 名成员

创作了21篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 2

过去 30 天: 14

总计 3,877