Skip to main content

介绍

Use this guide to replace a damaged front cover or to access the inner parts of the camera.

配件

没有特定配件。

  1. Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.
    • Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.

  2. On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.
    • On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.

    • Pry up the panel; starting from the front/bottom corner, as indicated.

    • There's a concealed lip, under the opposite edge.

  3. Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物

    Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物
  4. Remove three medium length screws from the bottom of the camera
    • Remove three medium length screws from the bottom of the camera

  5. Remove the two medium length screws on the front panel of the camera above the lens mount.
    • Remove the two medium length screws on the front panel of the camera above the lens mount.

    • Once you done, you may use the Spudger to panel from non-grip side.

    • If you start on the grip side, it will be more challenging to loosen the panel.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Daniel Bussone

于2011年01月28日注册

1,239 Reputation

创作了11篇指南

Team

Cal Poly, Team 3-41, Regan Winter 2011 Cal Poly, Team 3-41, Regan Winter 2011 的会员

CPSU-REGAN-W11S3G41

2 名成员

创作了11篇指南

2 Comments

This should be labelled: Easy.

tjt263 - 回复

Okay, there are several steps missing.

tjt263 - 回复

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 25

All Time: 4,599