修复你的物品

维修的权力

商店

Disassembling Canon EOS Rebel XS Front Cover

撰写者： Daniel Bussone (和另外8个贡献者)
  • 评论： 2
  • 收藏 1
  • 完成 1

难度

中等

步骤

4

所需时间

30秒

节

2

标志

1

Featured Student Guide

特色学生指南

该指南是我们优秀学生的辛勤劳动的成果，iFixit的工作人员认为这个很酷。

简介

Use this guide to replace a damaged front cover or to access the inner parts of the camera.

工具

购买这些工具

配件

没有特定配件。

  1. Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.

    • Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.

    编辑

  2. On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.

    • On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.

    • Pry up the panel; starting from the front/bottom corner, as indicated.

    • There's a concealed lip, under the opposite edge.

    编辑

  4. Remove three medium length screws from the bottom of the camera

    • Remove three medium length screws from the bottom of the camera

    编辑

  5. Remove the two medium length screws on the front panel of the camera above the lens mount.

    • Remove the two medium length screws on the front panel of the camera above the lens mount.

    • Once you done, you may use the Spudger to panel from non-grip side.

    • If you start on the grip side, it will be more challenging to loosen the panel.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与8其他贡献者

Daniel Bussone

于2011年01月28日注册

1,239 信誉积分

创作了11篇指南

徽章: 11

+ 8更多徽章

团队

Cal Poly, Team 3-41, Regan Winter 2011 Cal Poly, Team 3-41, Regan Winter 2011 的会员

CPSU-REGAN-W11S3G41

2 名成员

创作了21篇指南

2条评论

添加一条评论

This should be labelled: Easy.

tjt263 - 回复

Okay, there are several steps missing.

tjt263 - 回复

添加评论

浏览统计数据:

过去的24小时： 0

过去的7天： 2

过去的30天： 10

总计 4,802