简介

Use this guide to replace a damaged front cover or to access the inner parts of the camera.

配件

无需配件。

  1. Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.
    • Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.

    添加评论

  2. On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.
    • On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.

    • Pry up the panel; starting from the front/bottom corner, as indicated.

      • There's a concealed lip, under the opposite edge.

    添加评论

    • Remove three medium length screws from the bottom of the camera

    添加评论

    • Remove the two medium length screws on the front panel of the camera above the lens mount.

    • Once you done, you may use the Spudger to panel from non-grip side.

    • If you start on the grip side, it will be more challenging to loosen the panel.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Daniel Bussone

于2011年01月28日注册

1,215 信誉积分

创作了11篇指南

团队

Cal Poly, Team 3-41, Regan Winter 2011 Cal Poly, Team 3-41, Regan Winter 2011 的会员

CPSU-REGAN-W11S3G41

2 名成员

创作了11篇指南

This should be labelled: Easy.

tjt263 - 回复

Okay, there are several steps missing.

tjt263 - 回复

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 11

过去的30天: 57

总计 4,325