简介

Use this guide to repair a broken battery door. The battery door on this model tends to break off due to a weak plastic hinge.

配件

无需配件。

Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.
  • Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.

添加评论

On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.
  • On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.

  • Pry up the panel; starting from the front/bottom corner, as indicated.

    • There's a concealed lip, under the opposite edge.

添加评论

Remove three medium length screws from the bottom of the camera
  • Remove three medium length screws from the bottom of the camera

添加评论

Remove the two medium length screws on the front panel of the camera above the lens mount.
  • Remove the two medium length screws on the front panel of the camera above the lens mount.

  • Once you done, you may use the Spudger to panel from non-grip side.

  • If you start on the grip side, it will be more challenging to loosen the panel.

添加评论

Remove the two 4.5mm (.18in) long black screws from the camera grip using a #00 Phillips screwdriver.
  • Remove the two 4.5mm (.18in) long black screws from the camera grip using a #00 Phillips screwdriver.

添加评论

Use your fingertip to pry off the external shutter port cover.
  • Use your fingertip to pry off the external shutter port cover.

添加评论

Remove the two 5mm (.20in) long silver screws securing the grip to the camera using a #00 Phillips screwdriver.
  • Remove the two 5mm (.20in) long silver screws securing the grip to the camera using a #00 Phillips screwdriver.

添加评论

Use the spudger tool to carefully pry the grip from the rest of the camera. Use the spudger tool to carefully pry the grip from the rest of the camera. Use the spudger tool to carefully pry the grip from the rest of the camera.
  • Use the spudger tool to carefully pry the grip from the rest of the camera.

添加评论

Once the grip is loose, use your fingers to remove it from the camera.
  • Once the grip is loose, use your fingers to remove it from the camera.

添加评论

Remove the 4.8mm (.19in) long silver screw from the inside of the grip.
  • Remove the 4.8mm (.19in) long silver screw from the inside of the grip.

添加评论

Remove the hinge of the battery door from the inside of the grip. Our sample camera's battery door was broken off of its hinge. Picture two shows an example of a battery door that is not broken.
  • Remove the hinge of the battery door from the inside of the grip.

  • Our sample camera's battery door was broken off of its hinge. Picture two shows an example of a battery door that is not broken.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Daniel Bussone

于2011年01月28日注册

1,206 信誉积分

创作了11篇指南

团队

Cal Poly, Team 3-41, Regan Winter 2011 Cal Poly, Team 3-41, Regan Winter 2011 的会员

CPSU-REGAN-W11S3G41

2 名成员

创作了11篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 8

总计 3,916