修复你的物品 社区 商店

Disassembling Breville BKC600XL Bottom Covers

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独食用。

简介

This guide acts as a prerequisite for removing or replacing any part located inside the main body of the brewer.

你所需要的

  1. Disassembling Breville BKC600XL Bottom Covers, Bottom Cover #1: 步骤 1 中的图像 1，3 Disassembling Breville BKC600XL Bottom Covers, Bottom Cover #1: 步骤 1 中的图像 2，3 Disassembling Breville BKC600XL Bottom Covers, Bottom Cover #1: 步骤 1 中的图像 3，3

    • Use a Phillips #0 screwdriver to remove the following ten screws:

    • Four 18mm Phillips screws.

    • Four 9.75mm Phillips screws.

    • Two 8mm Phillips screws.

    • The cover will not remove entirely. Keep green ground wire attached to the cover.

    编辑

  2. Disassembling Breville BKC600XL Bottom Covers, Black Water Inlet: 步骤 2 中的图像 1，2 Disassembling Breville BKC600XL Bottom Covers, Black Water Inlet: 步骤 2 中的图像 2，2

    • Remove the two 14.5 Phillips screws.

    • Ensure that only the water inlet valve can be moved.

    编辑

  4. Disassembling Breville BKC600XL Bottom Covers, Bottom Cover #2: 步骤 3 中的图像 1，2 Disassembling Breville BKC600XL Bottom Covers, Bottom Cover #2: 步骤 3 中的图像 2，2

    • Use a Phillips #0 screwdriver to remove the following six screws:

    • Six 14.5mm Phillips screws.

    编辑

  5. Disassembling Breville BKC600XL Bottom Covers, Power Cord: 步骤 4 中的图像 1，2 Disassembling Breville BKC600XL Bottom Covers, Power Cord: 步骤 4 中的图像 2，2

    • Remove the power cord from the groove. (the black cord that leads into the green wire.)

    • This creates more slack in the wire to give you more room to work with.

    • DO NOT remove green wire from the cover its attached to.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与6其他贡献者

Antonio

于09/26/12注册

120 声望

创作了6篇指南

徽章: 10

+ 7更多徽章

团队

Cal Poly, Team 1-3, Propen Fall 2012 Cal Poly, Team 1-3, Propen Fall 2012 的会员

CPSU-PROPEN-F12S1G3

4 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 1,838