修复你的物品 社区 商店

Disassembling Black and Decker BL3000S Blender Base

简介

As a first step to clean, maintain, or install new parts (excluding the blender blades) for the Black and Decker BL3000S the blender base must be taken apart. This guide will provide step by step instructions of how to perform this task.

你所需要的

  1. Disassembling Black and Decker BL3000S Blender Base, Blender Base: 步骤 1 中的图像 1，2 Disassembling Black and Decker BL3000S Blender Base, Blender Base: 步骤 1 中的图像 2，2

    • Before disassembling the blender base, make sure the blender disconnected from any power outlet.

    • Lift the jar straight up from the base without tilting the jar.

    编辑

  2. Disassembling Black and Decker BL3000S Blender Base: 步骤 2 中的图像 1，1

    • Remove the top three 1/4 inch base screws using a Philip's head screwdriver.

    编辑

  4. Disassembling Black and Decker BL3000S Blender Base: 步骤 3 中的图像 1，2 Disassembling Black and Decker BL3000S Blender Base: 步骤 3 中的图像 2，2

    • Remove the two base leg covers next to the power cord using pliers or a flat-head screwdriver.

    • This provides access to the base screws beneath.

    编辑

  5. Disassembling Black and Decker BL3000S Blender Base: 步骤 4 中的图像 1，1

    • Remove the following screws that secure the top and bottom halves of the base.

    • One 1/4 Phillips screw

    • One TA-20 screw

    • Both screwdrivers must have a minimum of a three inch shank (length).

    • Screwdrivers with extenders will not fit down the access holes.

    编辑

  6. Disassembling Black and Decker BL3000S Blender Base: 步骤 5 中的图像 1，1

    • Lift the top half of the base from the bottom half of the base to reveal the internal mechanism.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与3其他贡献者

Andrew

于10/04/12注册

209 声望

创作了4篇指南

徽章: 10

+ 7更多徽章

团队

Cal Poly, Team 6-34, Regan Fall 2012 Cal Poly, Team 6-34, Regan Fall 2012 的会员

CPSU-REGAN-F12S6G34

4 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 16

过去 30 天： 57

总计 7,669