修复你的物品 社区 商店

Disassembling Asus W2W-A1 Protective Cover

你所需要的

  1. Disassembling Asus W2W-A1 Protective Cover, Keyboard: 步骤 1 中的图像 1，3 Disassembling Asus W2W-A1 Protective Cover, Keyboard: 步骤 1 中的图像 2，3 Disassembling Asus W2W-A1 Protective Cover, Keyboard: 步骤 1 中的图像 3，3

    • Remove the battery, then unscrew the 7 3 mm Phillips screws behind the battery. Make sure they go in separate, organized piles.

    • Unscrew the 2 4 mm Phillips head screws by the battery.

    编辑

  2. Disassembling Asus W2W-A1 Protective Cover: 步骤 2 中的图像 1，1

    • Remove the panel above the keyboard with a plastic spudger.

    编辑

  3. Disassembling Asus W2W-A1 Protective Cover: 步骤 3 中的图像 1，1

    • Once the panel is removed, use the spudger to pry out the keyboard.

    • Do not fully remove, for the keyboard is still attached to the ribbon cable.

    编辑

  4. Disassembling Asus W2W-A1 Protective Cover: 步骤 4 中的图像 1，2 Disassembling Asus W2W-A1 Protective Cover: 步骤 4 中的图像 2，2

    • Detach the ribbon cable from the keyboard by pulling the end of the ribbon cable that is attached inside of the laptop.

    • Be sure to detach from the root rather than from near the middle. It should slide out with ease.

    • Now you can fully remove the keyboard from the laptop.

    编辑

  6. Disassembling Asus W2W-A1 Protective Cover, Front Panel: 步骤 5 中的图像 1，1

    • Place your fingers or a spudger between the front panel and the rest of the laptop.

    • Pull upwards gently to detach the side you are grabbing.

    • Repeat on the other side until the panel easily peels off the laptop.

    编辑

  7. Disassembling Asus W2W-A1 Protective Cover, Touchpad: 步骤 6 中的图像 1，2 Disassembling Asus W2W-A1 Protective Cover, Touchpad: 步骤 6 中的图像 2，2

    • The touchpad should be loosely attached to the rest of the laptop by a ribbon cable.

    编辑

  8. Disassembling Asus W2W-A1 Protective Cover: 步骤 7 中的图像 1，1

    • Gently pull the ribbon cable out of its socket attached to the touchpad.

    • You are now able to remove the touchpad.

    编辑

  9. Disassembling Asus W2W-A1 Protective Cover, Protective Cover: 步骤 8 中的图像 1，1

    • Unscrew the 3 13 mm Phillips screws on the surface of the panel.

    • Unscrew the 4 mm Phillips screw beneath the panel.

    编辑

  10. Disassembling Asus W2W-A1 Protective Cover: 步骤 9 中的图像 1，3 Disassembling Asus W2W-A1 Protective Cover: 步骤 9 中的图像 2，3 Disassembling Asus W2W-A1 Protective Cover: 步骤 9 中的图像 3，3

    • There are many different types of screws in this step so make sure to arrange the screws by their different sizes.

    • Unscrew the six 17 mm Phillips head screws on the stands on the back and the 2 "A" screws of the same size adjacent to the stands.

    • Unscrew the two C Phillips head screws on the hard drive panel. There is also one more C screw in the upper right corner of the laptop as shown.

    • Unscrew the eight 8mm lock phillips screws and the screws along the outside of the laptop.

    • Unscrew the three 3mm E Phillips screw and the one 3mm D Phillips screw.

    • Unscrew the 5mm Phillips head screw that lies just above the D screw.

    编辑

  11. Disassembling Asus W2W-A1 Protective Cover: 步骤 10 中的图像 1，1

    • Unscrew the two 8 mm Phillips screws beneath the hard drive panel.

    • After finishing this step, flip the laptop over.

    编辑

  12. Disassembling Asus W2W-A1 Protective Cover: 步骤 11 中的图像 1，1

    • Everything should now be loose enough for you to start removing the panel.

    • Do not fully remove the panel, for there are still ribbons attached on the inside.

    编辑

  13. Disassembling Asus W2W-A1 Protective Cover: 步骤 12 中的图像 1，1

    • Carefully remove the ribbons from the base.

    • Then you can lift the panel to access the components beneath.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Nolan Schock

于04/14/14注册

501 声望

创作了5篇指南

徽章: 6

+ 3更多徽章

团队

Cal Poly, Team 13-29, Maness Spring 2014 Cal Poly, Team 13-29, Maness Spring 2014 的会员

CPSU-MANESS-S14S13G29

4 名成员

创作了8篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 392