跳转到主内容

DigiLand DL1010Q Front and Rear Cameras Replacement

你所需要的

  1. DigiLand DL1010Q Front and Rear Cameras Replacement, Rear Case: 步骤 1 中的图像 1,1
    • With a J00 Philips head screwdriver, unscrew the two 4mm black screws located at the bottom of the device.

    • Before disassembling your device, be sure it is powered off.

  2. DigiLand DL1010Q Front and Rear Cameras Replacement: 步骤 2 中的图像 1,2 DigiLand DL1010Q Front and Rear Cameras Replacement: 步骤 2 中的图像 2,2
    • Using a plastic opening tool, begin softly prying open device by first inserting it in between the front and back panels.

    • Continue prying the edges while moving around the device's perimeter until the back can be easily removed.

  3. DigiLand DL1010Q Front and Rear Cameras Replacement: 步骤 3 中的图像 1,1
    • Carefully lift back panel away from the body of the device.

    • Speaker wires are connected to both the front and back panel.

  4. DigiLand DL1010Q Front and Rear Cameras Replacement, Front and Rear Cameras: 步骤 4 中的图像 1,1
    在这个步骤中使用的工具:
    Tweezers
    $4.99
    购买
    • Begin by grabbing the tweezers and locating the ZIF ( zero Insertion Force) connector.

  5. DigiLand DL1010Q Front and Rear Cameras Replacement: 步骤 5 中的图像 1,1
    • Insert the tweezers into the black part of the ZIF connector and lift it in an upwards motion. By lifting the connection, you will see it will free the circuit strip.

  6. DigiLand DL1010Q Front and Rear Cameras Replacement: 步骤 6 中的图像 1,2 DigiLand DL1010Q Front and Rear Cameras Replacement: 步骤 6 中的图像 2,2
    • Take the tweezers and carefully grab the camera closest to the logic board and then pulling in an upwards motion will release both cameras from the device.

    • Set the cameras aside.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 3

总计 321